|
Titan LED 1080p 3D
2,000* Lumens | Contrast Ratio: 2,000:1 | Part Number: 114-461
|
Key Specifications:
|
Colour System: |
3-chip DLP® |
Display Type: |
3 x 0.95" DarkChip™ DMD™
|
DMD Specification: |
1920 x 1080 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast. |
Aspect Ratio: |
16x9 |
Fill Factor |
87% |
Key Features: |
- Digital Projection has developed a variant of its Titan projector that incorporates the latest LED illumination technology to provide amazing quality images.
- These LEDs remain stable and consistent over many years of use, providing a colour gamut that goes way beyond the requirements of HDTV or cinema.
- The stability of the colour and luminance is of particular value in multi-projector installations. The very high frame rate, low latency capabilities are perfectly suited to simulation.
- Coupled with Digital Projection's advanced video processing technology, the new light sources provide the ideal reference quality display for home theatre, post production, visualisation and simulation installations.
- *Takes into account Helmholtz-Kohlrausch effect. LED illuminated projectors produce extraordinarily high colour purity and saturation, thus appearing brighter than a lamp-based display with similar measured lumen specifications.
Standard Inputs (1-8): Front End Video Capabilities
Video & Graphics Processing
- High bandwidth digital & analog receiver with 10 bit A-D.
- Automatic detection of interlaced video and implementation of 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.
- Displayed image frame locked to input with as low as 1 frame total latency.
- 24p and 1080p native display.
- Image enhancement for MPEG, Mosquito noise & color transients in composite sources.
Geometry Correction
- Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
- Non-linear Warp adjustment by moving points on an interpolated grid.
Edge Blending
- Semi-automated multi projector tiling
- Correction for non-active pixels at the edge of the display.
Super Image Clarity
- Geometry correction and Edge Blending implemented in single stage process, retaining maximum image resolution.
Picture in Picture
- Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.
ColorMax™
- Accurate matching of projectors in tiled or blended applications.
- User selection and storage of primary and secondary color targets.
High Bandwidth Inputs (9-11): Bypassing Front End for Minimal Latency
- Pixel mapped to the display.
- Dual Link DVI accepts frame rates up to 160Hz with latency as low as 1 frame.
- HDMI 1.4 for Side by Side, Frame Packing & Top Bottom formats.
- Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
- FastFrame™ Smear Reduction.
- Dual Pipe processing: two sources in parallel for left and right eyes.
- Synchronisation of active glasses or polarising switcher.
Projector Controller Software
- Intuitive user interface for network control
- Simultaneous control of user-defined groups of projectors
- At-a-glance monitoring of projector status
|
Source Compatibility |
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI and DVI include Deep Color™ processing up to 36 bit.
DVI inputs are HDMI compatible.
Digital Audio Extraction via SPDIF for HDMI sources.
Graphics standards up to 1920 x 1200 at 60Hz via DVI or VGA.
Component Video (SD and HD) via YPrPb, RGB or RGBS.
S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM)
High Bandwidth, Pixel Mapped Path:
Dual DVI accepts graphics standards up to 1920 x 1200 at 120Hz.
HDMI 1.4 including 3D Standards
Dual Pipe (2 x DVI) |
Inputs/Outputs |
Video & Computer |
Type |
Connector |
Qty |
DVI-D / DVI-A
HDMI 1.3
3G-SDI
VGA / Analog RGB
Component Video
S-Video
Composite Video
Composite Video
High Bandwidth Ports
Main - Dual Link DVI-D
Sub - HDMI 1.4
Audio
SPDIF Digital Output |
DVI-I
HDMI
BNC
15-pin D-Sub
4 x BNC
4-pin Mini DIN
RCA
BNC
DVI-I
DVI-I
RCA |
1
1
1
1
1
1
1
1
1
1
1 |
.
Communication & Control |
Type |
Connector |
Qty |
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Wired Remote Out
Update Port
Service Port |
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
RJ45
USB Type B |
1
1
1
1
1
1
1
1 |
|
3D Formats Supported |
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom
|
HDTV Formats Supported |
1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 1080sf (23.98Hz, 24Hz), 720p (50Hz, 59.94Hz, 60Hz) |
Computer Compatibility |
Up to 1920 x 1200 |
Bandwidth |
170 MHz on analog RGB
165 Megapixels per second on HDMI and DVI
297 Megapixels per second on Dual Link DVI |
Remote Control |
Addressable IR remote control, wireless and wired with loop-through.
On-Board invertable keypad |
Automation Control |
RS232
LAN |
Colour Temperature |
User selectable from 3200 to 9000K |
Operation |
|
illumination Type |
LED Illumination Module |
Typical illumination Life |
60,000 hours |
Lenses |
Lens |
Part No. |
Optimised Focus Range* |
Lens Shift (Frame) |
0.67:1 fixed HB |
105-607 |
1.1m - 10m |
Vert: 0.176 (U) 0.176 (D) frame, Hor: 0.063 (L) 0.063 (R) frame |
1.12:1 fixed HB |
105-608 |
3m - 15m |
Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame |
1.12:1 (short) fixed HB |
105-609 |
1.2m - 2m |
Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame |
1.16 - 1.49:1 zoom HB |
109-236 |
3m - 15m |
Vert: 0.509 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame |
1.39 - 1.87:1 zoom HB |
105-610 |
4m - 24m |
Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame |
1.87 - 2.56:1 zoom HB |
105-611 |
4m - 24m |
Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame |
2.56 - 4.16:1 zoom HB |
105-612 |
9.1m - 45m |
Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame |
4.16 - 6.96:1 zoom HB |
105-613 |
12m - 80m |
Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame |
6.92 - 10.36:1 zoom HB |
109-235 |
12m - 80m |
Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame |
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
|
Lens Mount |
Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 5 user-definable preset positions. |
Mechanical Mounting |
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Rugged, staging tolerant chassis with integrated handles.
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments. |
Orientation |
Table Top or Inverted: Yes
Pointing Up: Yes
Pointing Down: Yes
Roll (Portrait): Yes |
Power Requirements |
100-240VAC 50/60Hz single phase |
Power Consumption |
400 |
Thermal Dissipation |
1365 |
Fan Noise |
42 dBA |
Operating/Storage Temperature Operating: |
Operating: 0 to 35C (32 to 95F)
Storage: -10 to 50C (14 to 122F) |
Operating Humidity |
20 to 80% non-condensing |
Weight |
39 kg / 86.0 lbs |
Dimensions |
L: 68.8 cm W: 58.5 cm H: 25.8 cm
L: 27.1 in W: 23.1 in H: 10.2 in |
Safety & EMC Regulations |
CE, FCC Class A, CCC |
Accessories |
Accessory |
Part No. |
RapidRig™ Frame
Infrared Remote (Replacement) |
111-265
105-023 |
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.
|
Downloads |
PDF CAD Drawings
AUTOCAD Drawings
STEP / IGS Drawings
Rigging Frame CAD Drawings Rigging Frame CAD Drawings
Lens CAD Drawings
|
User Guide |
User Guides
Important Information
Control Protocol
|
|
|
|
|