Click to Print This Page

Digital Projection Logo

Specification Sheet

11,000 ANSI / 12,500 ISO Lumens | Contrast Ratio: 2,000:1 | Part Number: 120-609

Colour System: DMD Specification:
3-chip DLP®

Display Type:
3 x 0.65" 1080p DMD™
Display capability up to 4K-UHD.
8.3 megapixels on screen at 4K-UHD (3840 x 2160).
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16:9
Fill Factor
Not applicable: Smooth Picture DMD™

Key Features

Environmental

  • Sealed Optics

  • Filterless

  • Dust Resistant


Video & Graphics Processing

  • HDR processing

  • DisplayPort 1.2.

  • 2 x HDMI 2.0.

  • HDBase-T.

  • 3G-SDI with loop-through.

  • Scaling with aspect ratio management for a wide range of sources.

  • DICOM simulation mode.


Geometry Correction

  • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc and Image Rotation.

  • Non-linear warp.

  • Digital zoom, pan and scan.

  • Blanking control for custom input window sizing.

  • Scaling available for fixed aspect ratio screens.

  • Unscaled processing for pixel mapped display.


Edge Blending

  • Blending control available for all sides with width control.

  • Correction for non-active pixels at the edge of the display.


Picture in Picture

  • Two sources can be displayed simultaneously using 2D inputs: either picture in picture (PIP), or side by side (PBP), with original aspect ratios maintained.


HDBaseT® Interface

  • Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.

  • Allows the projector to be placed up to 100m from the source with low cost cabling.

  • Supports up to 4K UHD 3840x2160 @ 60Hz (4:2:0) / 8-bit
    3840x2160 @ 30Hz (4:4:4) / 8-bit
    3840x2160 @ 30Hz (4:2:2) / 12-bit


Colour Processing

  • Four colour modes available.

  • Powerful seven point colour correction for accurate colour matching with presets.

  • Easy colour temperature selection.

  • Manual seven point colour adjustment.

  • Traditional lifts and gains.


Projector Controller Software

  • Intuitive user interface for network control.

  • Simultaneous control of user-defined groups of projectors.

  • At-a-glance monitoring of projector status.


Projector Automation

  • Real-time clock provides daily on/off automation.

  • E-mail alerts for system status.
Source Compatibility:
2D graphics standards up to 4K-UHD 3840 x 2160 resolution at 60Hz via HDMI 2.0, HDBaseT (4:2:0) and DisplayPort inputs.
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant upto 1080p.

Inputs/Outputs

 Video & Computer

Type

Connector

Qty
DisplayPort 1.2
HDMI 2.0
3G-SDI In
3G-SDI Out
HDBaseT/LAN		 DisplayPort
HDMI
BNC
BNC
LAN RJ45		 1
2
1
1
1
 Communication & Control

Type

Connector

Qty
LAN
RS232
Wired Remote
12V Trigger		 RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack		 1
1
1
2
3D Formats Supported
 HDTV Formats Supported
Not applicable 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
1080i (50Hz, 60Hz)
720p (50Hz, 60Hz)
2K (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
4K-UHD (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
Computer Compatibility Bandwidth
2D
4K-UHD up to 60Hz		 498 Megapixels per second via DisplayPort and HDMI 2.0.
Remote Control Automation Control
Addressable IR remote control, wireless and wired.
On-Board keypad.		 Crestron Room View® Connected
PJ Link Class 1
LAN
RS232
AMX (Device Discovery)
Served web pages (Projector status, Projector control, Crestron RoomView®, Network settings, Alert mail setup, Time setup, Error log, On screen Display )
Colour Temperature Operation
3200K to 9300K
illumination Type
 Typical illumination Life
Laser Light Source 20,000 hours
Lenses

Lens

Part No.

Optimised Focus Range*

Lens Shift
0.77 : 1 fixed HB 110-808 1.3m - 15.0m Vert: 0.38 (U) 0.38 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
1.16 : 1 fixed HB 110-809 1.4m - 25.0m Vert: 0.38 (U) 0.38 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
1.45 - 1.74 : 1 zoom HB 110-803 1.8m - 9.3m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
1.74 - 2.17 : 1 zoom HB 112-878 2.2m - 11.8m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
2.17 - 2.90 : 1 zoom HB 113-852 2.7m - 15.4m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
2.90 - 4.34 : 1 zoom HB 110-806 3.6m - 22.5m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.16 (L) 0.16 (R) frame
4.34 - 6.76 : 1 zoom HB 110-807 5.5m - 35m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.16 (L) 0.16 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount

Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (on selected lenses).
Mechanical Mounting Orientation
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet		 Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements Power Consumption
110 - 240VAC selectable, 50/60Hz single phase
(At 110 - 130VAC the light output is reduced to 70%.)		 1650W at 220VAC Nominal
Thermal Dissipation
 Fan Noise
5627 BTU/hr at 220 VAC, 4126 BTU/hr at 110 VAC Full power 4K-UHD Typ: 43dBA, Max 45dBA
Operating/Storage Temperature
 Operating Humidity
Operating: 0 to 35C (32 to 95F)
Storage: -20 to 60C (-4 to 140F)		 20% to 90% non-condensing
Weight (Chassis Only)
 Dimensions
70 kg
154.3 lb
H: 30.7 cm W: 58.5 cm L: 97.0 cm
H: 30.7 cm W: 70.1 cm L: 97.0 cm (with handles)
H: 12.1 in W: 23.0 in L: 38.2 in
H: 12.1 in W: 27.6 in L: 38.2 in (with handles)
Safety & EMC Regulations
  
UL/cUL, CB, CCC, KC, RoHS (CN), FCC Class A, FDA, CE
IEC EN 60825-1:2014 Class 1 Laser Product
IEC 60825-1:2007 Class 3R Laser Product
IEC EN 62471-5:2015 Risk Group 2
WEEE (UK)		  
Accessories
Accessory Part No.
RapidRig™ Frame
Infrared Remote (replacement)		 117-705
118-678

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads  

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Lens CAD Drawings

User Guides

Laser Risk Group Document

Important Information

Important Information (Korean)

Control Protocol

Specifications subject to change without notice. ©2020 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc

map

DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX
T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk

DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 } F: 770.420.1360 | www.digitalprojection.com

DIGITAL PROJECTION, CHINA Rm A2301,Shaoyaoju 101 North Lane,Shi Ao International Center,Chaoyang District,Beijing 100029,PR China
T: +86.10.58239771 | F: +86 10 58239770