Titan Super Quad 1080p 3D

20,000 Lumens | Contrast Ratio: 2,000:1 | Part Number: 113-103

Key Specifications:

Colour System:

3-chip DLP®

Display Type:

3 x 0.95" DarkChip™ DMD™

DMD Specification:

1920 x 1080 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.

Aspect Ratio:

16x9

Fill Factor

87%

Key Features:

Standard Inputs (1-8): Front End Video Capabilities

Video & Graphics Processing

High bandwidth digital & analog receiver with 10 bit A-D.
Automatic detection of interlaced video and implementation of 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.
Displayed image frame locked to input with as low as 1 frame total latency.
24p and 1080p native display.
Image enhancement for MPEG, Mosquito noise & color transients in composite sources.

Geometry Correction

Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
Non-linear Warp adjustment by moving points on an interpolated grid.

Edge Blending

Semi-automated multi projector tiling
Correction for non-active pixels at the edge of the display.

Super Image Clarity

Geometry correction and Edge Blending implemented in single stage process, retaining maximum image resolution.

Picture in Picture

Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.

ColorMax™

Accurate matching of projectors in tiled or blended applications.
User selection and storage of primary and secondary color targets.

High Bandwidth Inputs (9-11): Bypassing Front End for Minimal Latency

Pixel mapped to the display.
Dual Link DVI accepts frame rates up to 160Hz with latency as low as 1 frame.
HDMI 1.4 for Side by Side, Frame Packing & Top Bottom formats.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
FastFrame™ Smear Reduction.
Dual Pipe processing: two sources in parallel for left and right eyes.
Synchronisation of active glasses or polarising switcher.

Projector Controller Software

Intuitive user interface for network control
Simultaneous control of user-defined groups of projectors
At-a-glance monitoring of projector status

Source Compatibility

3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI and DVI include Deep Color™ processing up to 36 bit.
DVI inputs are HDMI compatible.
Digital Audio Extraction via SPDIF for HDMI sources.
Graphics standards up to 1920 x 1200 at 60Hz via DVI or VGA.
Component Video (SD and HD) via YPrPb, RGB or RGBS.
S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM)

High Bandwidth, Pixel Mapped Path:
Dual DVI accepts graphics standards up to 1920 x 1200 at 120Hz.
HDMI 1.4 including 3D Standards
Dual Pipe (2 x DVI)

Inputs/Outputs

Video & Computer			Communication & Control
Type	Connector	Qty	Type	Connector	Qty
DVI-D / DVI-A HDMI 1.3 3G-SDI VGA / Analog RGB Component Video S-Video Composite Video Composite Video High Bandwidth Ports Main - Dual Link DVI-D Sub - HDMI 1.4 Audio SPDIF Digital Output	DVI-I HDMI BNC 15-pin D-Sub 4 x BNC 4-pin Mini DIN RCA BNC DVI-I DVI-I RCA	1 1 1 1 1 1 1 1 1 1 1	3D Sync Out 3D Sync In LAN RS232 Wired Remote In Wired Remote Out Update Port Service Port	BNC BNC RJ45 9-pin D Sub 3.5mm Stereo Jack 3.5mm Stereo Jack RJ45 USB Type B	1 1 1 1 1 1 1 1

3D Formats Supported

Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom

HDTV Formats Supported

1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 1080sf (23.98Hz, 24Hz), 720p (50Hz, 59.94Hz, 60Hz)

Computer Compatibility

Up to 1920 x 1200

Bandwidth

170 MHz on analog RGB
165 Megapixels per second on HDMI and DVI
297 Megapixels per second on Dual Link DVI

Remote Control

Addressable IR remote control, wireless and wired with loop-through.
On-Board invertable keypad

Automation Control

RS232
LAN

Colour Temperature

User selectable from 3200 to 9000K

Operation

illumination Type

4 x 465W High Intensity Discharge

Typical illumination Life

Full Power: 1000 hours (up to 4000 hours in lamp sequential mode)

Eco Mode : 1500 hours (up to 6000 hours in lamp sequential mode)

Lenses

Lens	Part No.	Optimised Focus Range*	Lens Shift (Frame)
0.67:1 fixed HB	105-607	1.1m - 10m	Vert: 0.176 (U) 0.176 (D) frame, Hor: 0.063 (L) 0.063 (R) frame
1.12:1 fixed HB	105-608	3m - 15m	Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.12:1 (short) fixed HB	105-609	1.2m - 2m	Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.16 - 1.49:1 zoom HB	109-236	3m - 15m	Vert: 0.509 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.39 - 1.87:1 zoom HB	105-610	4m - 24m	Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.87 - 2.56:1 zoom HB	105-611	4m - 24m	Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
2.56 - 4.16:1 zoom HB	105-612	9.1m - 45m	Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
4.16 - 6.96:1 zoom HB	105-613	12m - 80m	Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
6.92 - 10.36:1 zoom HB	109-235	12m - 80m	Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount

Motorised and programmable shift, zoom and focus. Intelligent Lens Memory with 5 user-definable preset positions.

Mechanical Mounting

Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Rugged, staging tolerant chassis with integrated handles.
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.

Orientation

Table Top or Inverted: Yes
Pointing Up:        Yes - special software required.
Pointing Down:   No
Roll (Portrait):      No

Power Requirements

200-240VAC 50/60Hz single phase

Power Consumption

2400

Thermal Dissipation

8191

Fan Noise

48 dBA

Operating/Storage Temperature Operating:

Operating: 0 to 40C (32 to 104F)
Storage: -10 to 50C (14 to 122F)

Operating Humidity

20 to 80% non-condensing

Weight

39 kg / 86.0 lbs

Dimensions

L: 68.8 cm W: 58.5 cm H: 25.8 cm
L: 27.1 in W: 23.1 in H: 10.2 in

Safety & EMC Regulations

CE, FCC Class A, CCC, KC

Accessories

Accessory	Part No.
Lamp & Filter Kit, 465W, 4 Lamp Lamp & Filter Kit, 465W, 2 Lamp Lamp, 465W RapidRig™ Frame	113-715 113-714 113-628 111-265

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Rigging Frame CAD Drawings Rigging Frame CAD Drawings

Lens CAD Drawings

User Guide

User Guides

Important Information

Control Protocol