Click to Print This Page

logo
logo

 

Titan Super Quad WUXGA 3D

20,000 Lumens | Contrast Ratio: 2,000:1 | Part Number: 113-104


Key Specifications:

Colour System: 3-chip DLP®
Display Type: 3 x 0.96" DarkChip™ DMD™
DMD Specification: 1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x10
Fill Factor 87%
Key Features:

Standard Inputs (1-8): Front End Video Capabilities

Video & Graphics Processing
  • High bandwidth digital & analog receiver with 10 bit A-D.
  • Automatic detection of interlaced video and implementation of 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.
  • Displayed image frame locked to input with as low as 1 frame total latency.
  • 24p and 1080p native display.
  • Image enhancement for MPEG, Mosquito noise & color transients in composite sources.
Geometry Correction
  • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
  • Non-linear Warp adjustment by moving points on an interpolated grid.
Edge Blending
  • Semi-automated multi projector tiling
  • Correction for non-active pixels at the edge of the display.
Super Image Clarity
  • Geometry correction and Edge Blending implemented in single stage process, retaining maximum image resolution.
Picture in Picture
  • Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.
ColorMax™
  • Accurate matching of projectors in tiled or blended applications.
  • User selection and storage of primary and secondary color targets.

High Bandwidth Inputs (9-11): Bypassing Front End for Minimal Latency

  • Pixel mapped to the display.
  • Dual Link DVI accepts frame rates up to 160Hz with latency as low as 1 frame.
  • HDMI 1.4 for Side by Side, Frame Packing & Top Bottom formats.
  • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
  • FastFrame™ Smear Reduction.
  • Dual Pipe processing: two sources in parallel for left and right eyes.
  • Synchronisation of active glasses or polarising switcher.

Projector Controller Software

  • Intuitive user interface for network control
  • Simultaneous control of user-defined groups of projectors
  • At-a-glance monitoring of projector status
Source Compatibility 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI and DVI include Deep Color™ processing up to 36 bit.
DVI inputs are HDMI compatible.
Digital Audio Extraction via SPDIF for HDMI sources.
Graphics standards up to 1920 x 1200 at 60Hz via DVI or VGA.
Component Video (SD and HD) via YPrPb, RGB or RGBS.
S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM)

High Bandwidth, Pixel Mapped Path:
Dual DVI accepts graphics standards up to 1920 x 1200 at 120Hz.
HDMI 1.4 including 3D Standards
Dual Pipe (2 x DVI)
Inputs/Outputs
Video & Computer Communication & Control
Type Connector Qty Type Connector Qty
DVI-D / DVI-A
HDMI 1.3
3G-SDI
VGA / Analog RGB
Component Video
S-Video
Composite Video
Composite Video

High Bandwidth Ports
Main - Dual Link DVI-D
Sub - HDMI 1.4

Audio
SPDIF Digital Output
DVI-I
HDMI
BNC
15-pin D-Sub
4 x BNC
4-pin Mini DIN
RCA
BNC


DVI-I
DVI-I


RCA
1
1
1
1
1
1
1
1


1
1


1
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote In
Wired Remote Out
Update Port
Service Port
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
RJ45
USB Type B
1
1
1
1
1
1
1
1
3D Formats Supported Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom
HDTV Formats Supported 1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 1080sf (23.98Hz, 24Hz), 720p (50Hz, 59.94Hz, 60Hz)
Computer Compatibility Up to 1920 x 1200
Bandwidth 170 MHz on analog RGB
165 Megapixels per second on HDMI and DVI
297 Megapixels per second on Dual Link DVI
Remote Control Addressable IR remote control, wireless and wired with loop-through.
On-Board invertable keypad
Automation Control RS232
LAN
Colour Temperature User selectable from 3200 to 9000K
Operation
illumination Type 4 x 465W High Intensity Discharge
Typical illumination Life Full Power: 1000 hours (up to 4000 hours in lamp sequential mode)

Eco Mode : 1500 hours (up to 6000 hours in lamp sequential mode)
Lenses
Lens Part No. Lens Shift (Frame) Optimised Focus Range*
0.37:1 (Right Angled) 120-510 1.6m - 4.9m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.3 (L) 0.3 (R) frame
0.65-0.85:1 (Right Angled) 120-511 2.8m - 8.4m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.2 (L) 0.2 (R) frame
0.8-1.16:1 (Includes support bracket) 120-827 1.7m - 11m Vert: 0.4 (U) 0.4 (D) frame, Hor: 0.19 (L) 0.19 (R) frame
0.67:1 fixed HB 105-607 1.1m - 10m Vert: 0.108 (U) 0.108 (D) frame, Hor: 0.044 (L) 0.044 (R) frame
1.12:1 (short) fixed HB 105-608 3m - 15m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.16 - 1.49:1 zoom HB 109-236 3m - 15m Vert: 0.408 (U) 0.408 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.39 - 1.87:1 zoom HB 105-610 4m - 24m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.87 - 2.56:1 zoom HB 105-611 4m - 24m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
2.56 - 4.16:1 zoom HB 105-612 9.1m - 45m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
4.16 - 6.96:1 zoom HB 105-613 12m - 80m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
6.92 - 10.36:1 zoom HB 109-235 12m - 80m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorised and programmable shift, zoom and focus. Intelligent Lens Memory with 5 user-definable preset positions.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Rugged, staging tolerant chassis with integrated handles.
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes - special software required.
Pointing Down:   No
Roll (Portrait):      No
Power Requirements 200-240VAC 50/60Hz single phase
Power Consumption 2400
Thermal Dissipation 8191
Fan Noise 48 dBA
Operating/Storage Temperature Operating: Operating: 0 to 40C (32 to 104F)
Storage: -10 to 50C (14 to 122F)
Operating Humidity 20 to 80% non-condensing
Weight 39 kg / 86.0 lbs
Dimensions L: 68.8 cm W: 58.5 cm H: 25.8 cm
L: 27.1 in W: 23.1 in H: 10.2 in
Safety & EMC Regulations CE, FCC Class A, CCC, KC
Accessories
Accessory Part No.
Lamp & Filter Kit, 465W, 4 Lamp
Lamp & Filter Kit, 465W, 2 Lamp
Lamp, 465W
RapidRig™ Frame
113-715
113-714
113-628
111-265

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Rigging Frame CAD Drawings Rigging Frame CAD Drawings

Lens CAD Drawings

User Guide

User Guides

Important Information

Control Protocol

Control Protocol