Click to Print This Page

logo
logo

 

M-Vision 23000 WU

23,000 ISO / 20,500 ANSI Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) | Part Number: 121-083


Key Specifications:

Colour System: Blue + Red Laser and 4-segment colour wheel
Display Type: 1 x 0.96" DarkChip™ DMD™
DMD Specification: 1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x10
Fill Factor 87%
Key Features:
Red Laser Assist
  • Uses blue and red laser diodes for increased colour fidelity and highly accurate colours
Video & Graphics Processing
  • HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & TopBottom 3D Formats.
  • Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources.
  • Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
  • Synchronisation of active glasses.
  • 3G-SDI with loop-through.
  • 24p and 1080p native display.
Geometry Correction
  • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
  • Blanking control for custom input window sizing.
  • Scaling for fixed aspect ratio screens.
Edge Blending
  • Correction for non-active pixels at the edge of the display.
Picture in Picture
  • Two sources can be displayed either one within the other (PIP) , or side by side, with the original aspect ratios maintained.
HDBaseT® Interface
  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
  • Allows the projector to be placed up to 100m from source with low cost cabling.
Colour Processing
  • Powerful seven-point colour correction for accurate colour matching.
Projector Controller Software
  • Intuitive user interface for network control.
  • Simultaneous control of user-defined groups of projectors.
  • At-a-glance monitoring of projector status.
Projector Automation
  • Real-time clock provides daily on/off automation.
Installation
  • Integrated stacking mount pins.
  • Eye bolts included for easy rigging.
  • IP6X sealed optics
Source Compatibility 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI or DisplayPort.
Inputs/Outputs
Video & Computer
Type Connector Qty
DisplayPort 1.1a
HDMI 1.4b
3G-SDI in
3G-SDI out
HDBaseT
DisplayPort
HDMI
BNC
BNC
LAN RJ45
2
2
1
1
1
.
Communication & Control
Type Connector Qty
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote
12V Trigger

NOTE: The HDBaseT and LAN ports are not shared.
BNC
BNC
RJ45
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
1
1
1
1
1
2
3D Formats Supported Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom
HDTV Formats Supported 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080i (50Hz, 60Hz), 720p (50Hz, 60Hz)
Computer Compatibility Up to 1920 x 1200
Bandwidth 165 MHz on analog RGB
165 Megapixels per second on HDMI
Remote Control Addressable IR Remote Control, wireless and wired
On-Board keypad
Automation Control Crestron RoomView® Connected
PJLink Class 1
LAN
RS232
AMX (Device Discovery)
Served web page
Colour Temperature 3200K to 9300K
Operation
illumination Type Laser Light Source
Typical illumination Life 20,000 hours
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.38:1 fixed 123-417 1.6m - 5m Vert: 0.50 (U) 0.50 (D) frame, Hor: 0.025 (L) 0.025 (R) frame
0.9 - 1.2 : 1 zoom 120-624 0.92m - 10.6m Vert: 0.45 (U) 0.45 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
1.20 - 1.56 : 1 zoom 120-625 0.95m - 17.47m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
1.50 - 2.00 : 1 zoom 120-626 1.24m - 16.4m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
2.00 - 4.00 : 1 zoom 120-627 1.82m - 41.8m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
4.00 - 7.00 : 1 zoom 120-628 4.38m - 74.5m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
6.9 - 10.3 : 1 zoom 123-418 12m - 80m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorised shift, zoom and focus, with programmable shift
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 110V~130Vac/ 50~60Hz 180V~240Vac/ 50~60Hz single phase * Note that in 120V operation, the projector will be at 65% brightness
Power Consumption Typical 1900W @ 240VAC in Normal mode
Typical 1250W @ 110VAC in Normal mode
Thermal Dissipation Typical 6482 BTU/Hour @ 220VAC in Normal mode
Typical 4265 BTU/Hour @ 110VAC in Normal mode
Fan Noise Normal mode: 50 dBA max, 48 dBA typical
Eco mode: 48 dBA max, 46dBA typical
Operating/Storage Temperature: Operating: 0 to 35C (32 to 95F)
Operating: >35 (95F) Projector automatically set to eco mode
Storage: -20 to 60C (-4 to 140F)
Operating Humidity 10% to 90% relative, non-condensing
Weight 47.2 kg / 104.1 lbs
Dimensions L: 74.8cm W: 53.0cm H: 24.8cm
L: 29.5in W: 20.9in H: 9.8in
Safety & EMC Regulations UL / cUL, CB, CCC, FCC Class 1, CE, BIS, RoHS 2, IEC EN 60825-1 Class 3R Laser Product, IEC EN 62471-5 Risk Group 2
Accessories
Accessory Part No.
Infrared Remote (replacement)
117-780

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Lens CAD Drawings

User Guide

User Guides

User Guides (German)

User Guides (French)

Laser Risk Group Document

Important Information

Important Information (German)

Important Information (French)

Control Protocol