| Colour System: |
Blue + Red Laser illumination |
| Display Type: |
1 x 0.96" DarkChip 3™ DMD™
|
| DMD Specification: |
1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast. |
| Aspect Ratio: |
16x10 |
| Fill Factor |
87% |
| Key Features: |
ColorBoost+Red Laser
- Uses red laser diodes for increased colour fidelity and highly accurate colours
Video & Graphics Processing
- HDMI 2.0 compliance for Side by Side, Frame Packing, Frame Sequential and TopBottom 3D Formats.
- DisplayPort 1.2 with HDCP 2.2 compliance.
- 10-bit colour processing (30-bits per pixel).
- Support for 1080p 24Hz native display.
- Support for 4K 4096 x 2160 resolution.
- HDR support
- Input source automatically detected.
- Input redundancy mode with auto switching.
- Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
- Syncronisation of active 3D glasses or polarising switcher.
- DICOM simulation mode.
- Sealed light engine
Geometry Correction
- Vertical & Horizontal Keystone correction.
- Four Corner adjustment.
- Rotation.
- Pin/Barrel.
- Wall Corner adjustment.
- Centre Shift (Horizontal and Vertical linearity adjustment).
- Custom Warp.
- Upload of maps for warp, blend, uniformity and masking.
- Selectable aspect ratios: 5:4 / 4:3 / 16:10 /16:9 / 1.88 / 2.35 / TheaterScope / Source / Unscaled.
- Digital Zoom.
- Blanking control for custom input window sizing.
Edge Blending
- Correction for non-active pixels at the edge of the display.
HDBaseT® Interface
- Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
- Allows the projector to be placed up to 100m from source with low cost cabling.
- HDBaseT® Includes Ethernet 100BaseT and RS232/IR control.
Colour Processing
- Powerful seven-point colour correction for accurate colour matching.
Projector Controller Software
- Intuitive user interface for network control.
- Simultaneous control of user-defined groups of projectors.
- At-a-glance monitoring of projector status.
Projector Automation
- Real-time clock provides daily on/off automation.
Installation
- 4 x eye bolts included for easy rigging.
- 4 x top stacking mounts and mount securing pins
- IP6X sealed optics.
|
| Source Compatibility |
12G-SDI single link - SMPTE 292M (HD), SMPTE 424M (3G), SMPTE 2081 (6G), SMPTE 2082 (12G). |
| Inputs/Outputs |
| Video & Computer |
| Type |
Connector |
Qty |
DisplayPort 1.2
HDMI 2.0
HDBaseT
12G-SDI In
12G-SDI Out (loopthrough) |
DisplayPort
HDMI
RJ45
BNC
BNC |
2
2
1
1
1 |
.
| Communication & Control |
| Type |
Connector |
Qty |
3D Sync In
3D Sync Out
3D Sync IR
Ethernet / Art-Net
HDBaseT/Ethernet/RS232/IR
Serial In RS-232C
Wired Remote In
Wired Remote Out
12V Trigger
USB Power out 5V/2A |
BNC
BNC
BNC
EtherCON RJ45
RJ45
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A |
1
1
1
1
1
1
1
1
1
1 |
|
| 3D Formats Supported |
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom
Compatible with polarised 3D glasses |
| HDTV Formats Supported |
EDTV (480p, 576p,) HDTV (720p, 1080i, 1080p, UHD, DCI 4K), Display Support for 4K-UHD 3840 x 2160 60HZ and up to 4096 x2160 60Hz. |
| Computer Compatibility |
VGA, SVGA, XGA, SXGA, SXGA+, WXGA, UXGA, WUXGA, Support for WQXGA |
| Bandwidth |
18Gb/s (600MHz clock rate) on HDMI |
| Remote Control |
Addressable IR Remote Control, wireless and wired
On-Board keypad |
| Automation Control |
LAN
RS-232
Alert E-Mails from Projector
Served webpage OSD functions for full Projector Control via web browser
LAN Control-Crestron Roomview™
LAN Control-Crestron eControl
LAN Control-PJ Link compatible
LAN Control-AMX SSDP
LAN to RS232 (RS232 by Telnet)
Concurrence Control for RS232/LAN
DMX Art-Net control
Scheduled On and Off times |
| Colour Temperature |
User selectable: 3200K/ 5400K / 6500K / 7500K / 9300K / Native |
| Operation |
 |
| illumination Type |
MCL Blue Laser Light Source and MCL Red Laser Light Source with Custom light output setting range: 30% - 100%
Constant Brightness mode. |
| Typical illumination Life |
20,000 hours |
| Lenses |
| Lens |
Part No. |
Optimised Focus Range* |
Lens Shift (Frame) |
| 0.38:1 fixed |
123-417 |
1.6m - 5m |
Vert: 0.50 (U) 0.50 (D) frame, Hor: 0.025 (L) 0.025 (R) frame |
| 0.9 - 1.2 : 1 zoom |
120-624 |
0.92m - 10.6m |
Vert: 0.45 (U) 0.45 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
| 1.20 - 1.56 : 1 zoom |
120-625 |
0.95m - 17.47m |
Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
| 1.50 - 2.00 : 1 zoom |
120-626 |
1.24m - 16.4m |
Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
| 2.00 - 4.00 : 1 zoom |
120-627 |
1.82m - 41.8m |
Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
| 4.00 - 7.00 : 1 zoom |
120-628 |
4.38m - 74.5m |
Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
| 6.9 - 10.3 : 1 zoom |
123-418 |
12m - 80m |
Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
|
| Lens Mount |
Motorised Shift, Zoom and Focus. Intelligent Lens Memory with 10 user-definable pre-set positions.
|
| Mechanical Mounting |
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet |
| Orientation |
Table Top or Inverted: Yes
Pointing Up: Yes
Pointing Down: Yes
Roll (Portrait): Yes |
| Power Requirements |
200 240VAC 50/60Hz single phase 10.6A
110 - 130VAC 50/60Hz single phase 11.1A |
| Power Consumption |
Typical 1300W @ 220VAC in Normal Mode
Typical 850W @ 110VAC in Normal mode
|
| Thermal Dissipation |
Typical 4437 BTU/Hour @ 220VAC in Normal mode
Typical 2901 BTU/Hour @ 110VAC in Normal mode
|
| Fan Noise |
Normal mode: 46 dBA max, 44 dBA typical
Eco mode: 44 dBA max, 42 dBA typical
|
| Operating/Storage Temperature: |
Operating: 0 to 40 °C (32 to 104 °F)
Operating: 33 - 35 °C (91.4 - 95 °F) Projector automatically set to 90% laser power mode
Operating: 35 - 40 °C (95 - 104 °F) Projector automatically set to eco mode
Storage: -20 to 60 °C (-4 to 140 °F)
|
| Operating Humidity |
90% (with maximum temperature of 35 °C) non-condensing |
| Weight |
47.2 kg / 104.1 lbs |
| Dimensions |
Projector Dimensions (Including handles and feet)
L: 768.4mm x W: 598.8mm x H: 302.75mm
L: 30.25 inch x W: 23.57 inch x H: 11.92 inch
Projector Dimensions (Excluding handles)
L: 669.4mm x W: 598.8mm x H: 302.75mm
L: 26.35 inch x W: 23.57 inch x H: 11.92 inch
Carton Dimensions
944mm x W: 758mm x H: 516mm
L: 37.17 inch x W: 29.84 inch x H: 20.31 inch |
| Safety & EMC Regulations |
CB report, cTUVus, CE (European Economic Area), UKCA (United Kingdom), CCC (China), FCC Class A (USA), FDA, KC (Korea), BSMI (Taiwan), RCM (Australia), BS IEC EN 60825-1:2014 Class 1 Laser Product, BS IEC EN 62471-5:2015 RG3, IEC 62471-5: Ed. 1.0 RG2 (for REF version employing RG2 lenses), GB 7247.1-2012 |
| Accessories |
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.
|
| Downloads |
PDF CAD Drawings
AUTOCAD Drawings
STEP / IGS Drawings
Lens CAD Drawings
|
| User Guide |
User Guides
User Guides (German)
User Guides (French)
Laser Risk Group Document
Important Information
|
DIGITAL PROJECTION, LTD
Unit 3, Aniseed Park, Broadgate, 
T: +44 (0)161 947 3300
www.digitalprojection.com
DIGITAL PROJECTION, INC
DIGITAL PROJECTION, CHINA 