Click to Print This Page

logo
logo

 

Titan Laser 29000 WU

29,000 ISO / 26,000 ANSI Lumens | Contrast Ratio: 18,000:1 (Dynamic Black) / 2,000:1 Native | Part Number: 119-837


Key Specifications:

Colour System: Laser Phosphor
Display Type: 3 x 0.96" WUXGA DMD™
DMD Specification: Display capability upto WUXGA
2.3 megapixels pixels on screen at WUXGA
Fast transit pixels for smooth greyscale and improved contrast.
Display resolutions WUXGA (1920 x 1200)
Aspect Ratio: 16x10
Fill Factor 87%
Key Features:
Video & Graphics Processing
  • DisplayPort 1.2
  • 2 x HDMI 2.0b HDCP 2.2
  • HDR processing
  • 2 x HDMI 1.4b HDCP 1.4 for Dual Pipe processing and Frame Sequential 3D Format.
  • Sequential Processing: 3D via single HDMI 1.4b input
  • Dual Pipe Processing: 3D Left and Right eyes via two HDMI1.4b inputs.
  • Syncronisation of active glasses.
  • 3G-SDI with loop-through.
  • DICOM simulation mode.
  • DMX Art-Net

General Features

  • Constant Brightness control
  • Multi-Projector Brightness control
  • Compatible with selected competitor lenses via lens converter
  • Selectable EDID
  • Custom Start-up Logo


Geometry Correction

  • 4-Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc and Image Rotation
  • Non-linear warp
  • Digital Zoom, Pan and Scan
  • Blanking control for custom input window sizing.
  • Scaling available for fixed aspect ratio screens.
  • Unscaled processing for pixel mapped display
Edge Blending
  • Blending control available for all sides with width control.
  • Correction for non-active pixels at the edge of the display.
  • Electronic Black Level Compensation.
Picture in Picture
  • Two sources can be displayed symultaneously using 2D inputs. either picture in picture (PIP) , or side by side (PBP), with the original aspect ratios maintained.
HDBaseT® Interface
  • Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable
  • Allows projector to be placed up to 100m from source with low cost cabling
  • Supports up to 4K UHD 3840 x 2160@60Hz 4:2:0 or 4K UHD 3840 x 2160@30Hz 4:2:2
Colour Processing
  • Four colour modes available
  • Powerful seven point colour correction for accurate colour matching with presets.
  • Easy colour temperature selection
  • Manual seven point colour adjustment
  • Traditional lifts and gains
Projector Controller Software
  • Intuitive user interface for network control
  • Simultaneous control of user-defined groups of projectors
  • At-a-glance monitoring of projector status
Projector Automation
  • Real-time clock provides daily on/off automation
  • E-mail alerts for system status
Source Compatibility 2D Graphics standards up to 4K-UHD 3840x2160 resolution at 60Hz via HDMI 2.0, HDBaseT (4:2:0), DisplayPort inputs
3D Graphics standards up to dual-pipe WUXGA 120Hz via HDMI 1.4b inputs
3G-SDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.

Inputs/Outputs
Video & Computer Communication & Control
Type Connector Qty Type Connector Qty
DisplayPort 1.2 (2D)
HDMI 1.4b (3D)
HDMI 2.0b (2D)
3G-SDI in (2D)
3G-SDI out
HDBaseT/LAN (2D)
DisplayPort
HDMI
HDMI
BNC
BNC
RJ45
1
2
2
1
1
1
3D Sync In
3D Sync Out
LAN
RS-232
Wired Remote
12V Trigger
3D Sync IR Out
BNC
BNC
RJ45
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
BNC
1
1
2
1
1
2
1
3D Formats Supported Sequential / 1080p @100Hz
Sequential / 1080p @120Hz
Sequential / WUXGA @100Hz (RB)
Dual -Pipe / 1080p @ 50Hz
Dual -Pipe / 1080p @ 60Hz
Dual -Pipe / WUXGA @ 50Hz (RB)
Dual -Pipe / WUXGA @ 60Hz
HDTV Formats Supported 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
1080i (50Hz, 60Hz)
720p (50Hz, 60Hz)
2K (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
4K-UHD (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
Computer Compatibility 2D 4K-UHD upto 60Hz
3D Supported Formats will be displayed upto WUXGA
Bandwidth 498 Mpixels/sec via DisplayPort and HDMI2.0.
Remote Control Addressable IR remote Control, Wireless and wired. On-Board keypad
Automation Control Crestron RoomView Connected
LAN
RS-232
AMX (Device Discovery)
DMX Art-Net
Served web pages (Projector status, Projector control, Crestron RoomView, Network settings, Alert mail setup, Time setup, Error log, On screen Display )
Colour Temperature 3200K to 9300K
Operation
illumination Type Laser Light Source
Typical illumination Life 20,000 hours
Lenses
Lens Part No. Lens Shift (Frame) Optimised Focus Range*
0.37:1 (Right Angled) 120-510 1.6m - 4.9m Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.3 (L) 0.3 (R) frame
0.65-0.85:1 (Right Angled) 120-511 2.8m - 8.4m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.2 (L) 0.2 (R) frame
0.8-1.16:1 (Includes support bracket) 120-827 1.7m - 11m Vert: 0.4 (U) 0.4 (D) frame, Hor: 0.19 (L) 0.19 (R) frame
0.67:1 fixed HB 105-607 1.1m - 10m Vert: 0.108 (U) 0.108 (D) frame, Hor: 0.044 (L) 0.044 (R) frame
1.12:1 (short) fixed HB 105-608 3m - 15m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.16 - 1.49:1 zoom HB 109-236 3m - 15m Vert: 0.408 (U) 0.408 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.39 - 1.87:1 zoom HB 105-610 4m - 24m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
1.87 - 2.56:1 zoom HB 105-611 4m - 24m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
2.56 - 4.16:1 zoom HB 105-612 9.1m - 45m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
4.16 - 6.96:1 zoom HB 105-613 12m - 80m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame
6.92 - 10.36:1 zoom HB 109-235 12m - 80m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorised Shift, Zoom and Focus.(Lenses 0.67:1 & 1.12:1 have manual focus, shift is motorised)
Intelligent Lens Memory with 10 user-definable pre-set positions for zoom lenses.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 200VAC to 230 VAC, 50/60Hz single phase
Power Consumption Typical 2800W, Max 3100W
Thermal Dissipation Max 10284 BTU/Hour @ 200VAC
Fan Noise Typical: 50dBa , Maximum 52dBa, Eco Typical 47dBa
Operating/Storage Temperature Operating: Operating: Full Power 0°C ~ 35°C (32°F ~95°F), ECO upto 40°C (104°F)
Storage: -20°C ~ 60°C (-4°F ~ 140°F)
Operating Humidity Operating: 10% ~ 90% non-condensing Storage: 10% ~ 90% non-condensing
Weight 95 kg / 209 lbs
Dimensions L: 969.3mm, W: 650mm, H: 397.3mm (Excl handles)
L: 38.2in, W: 25.6in, H: 15.6in (Excl handles)
Safety & EMC Regulations UL, CB, CCC, KC, RoHS (CN), FCC Class A, FDA, CE, IEC EN 60825-1 Class 3R Laser Product, IEC EN 62471-5 Risk Group 3, WEEE (UK)
Accessories
Accessory Part No.
Infrared Remote Control (Replacement)
Optional lens mount insert for selected competitor lenses
118-678
119-729

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Rigging Frame CAD Drawings Rigging Frame CAD Drawings

Lens CAD Drawings

User Guide

User Guides

User Guides (German)

User Guides (French)

Laser Risk Group Document

Important Information

Control Protocol