Click to Print This Page

logo
logo

 

Titan 41000 4K-UHD (Preliminary)

41,000 ISO / 36,000 ANSI @ 4K-UHD. 45,000 ISO / 42,000 ANSI @ WUXGA Lumens | Contrast Ratio: 18,000:1 (Dynamic Black) / 2,000:1 Native | Part Number: 121-654


Key Specifications:

Colour System: Laser Phosphor with ColorBoost+Red Laser
Display Type: 3 x 0.96" WUXGA DMD™
DMD Specification: Display capability up to 4K-UHD
8.3 megapixels on screen at 4K-UHD
Fast transit pixels for smooth greyscale and improved contrast.
Display capability up to 4K-UHD (3840x2160)
Aspect Ratio: 16:9
Fill Factor N/A as Smooth Picture DMD
Key Features:
Video & Graphics Processing
  • HDMI 2.0 compliance for Side by Side, Frame Packing, Frame Sequential and TopBottom 3D Formats.
  • DisplayPort 1.2 with HDCP 2.2 compliance.
  • 10-bit colour processing (30-bits per pixel).
  • Support for 1080p 24Hz native display.
  • Support for 4K 4096 x 2160 resolution.
  • HDR support
  • Input source automatically detected.
  • Input redundancy mode with auto switching.
  • Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
  • Syncronisation of active 3D glasses or polarising switcher.
  • DICOM simulation mode.
  • Sealed light engine

General Features

  • Constant Brightness control
  • Multi Projector brightness and colour control.
  • Compatible with selected 3rd party lenses via lens converter
  • Selectable EDID
  • Custom Start-up Logo
  • Smear Reduction (fast frame) (2D Only)
  • Electronic PIC MUTE with selectable fade in/out timers
  • On board 4 -line LCD display for at a glance status


Geometry Correction

  • Vertical & Horizontal Keystone correction.
  • Four Corner adjustment.
  • Rotation.
  • Pin/Barrel.
  • Wall Corner adjustment.
  • Centre Shift (Horizontal and Vertical linearity adjustment).
  • Custom Warp.
  • Upload of maps for warp, blend, uniformity and masking.
  • Selectable aspect ratios: 5:4 / 4:3 / 16:10 /16:9 / 1.88 / 2.35 / TheaterScope / Source / Unscaled.
  • Digital Zoom.
  • Blanking control for custom input window sizing.
Edge Blending
  • Blending control available for all sides with width control.
  • Correction for non-active pixels at the edge of the display.
  • Electronic Black Level Compensation.
  • Upload of Blend Maps including Blend, Uniformity, Masking, Pixel by Pixel
HDBaseT® Interface
  • Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable
  • Allows projector to be placed up to 100m from source with low cost cabling
  • Supports up to 4K 4096 x 2160@60Hz 4:2:0 or 4K 4096 x 2160@30Hz 4:2:2
  • Includes Ethernet 100BaseT and RS232/IR control.
Colour Processing
  • Four colour modes available
  • Powerful seven point colour correction for accurate colour matching with presets.
  • Easy colour temperature selection
  • Manual seven point colour adjustment
  • Traditional lifts and gains
Projector Controller Software
  • Intuitive user interface for network control
  • Simultaneous control of user-defined groups of projectors
  • At-a-glance monitoring of projector status
Projector Automation
  • Real-time clock provides daily on/off automation
  • E-mail alerts for system status
Installation
  • 4 x eye bolts fitted for easy rigging.
  • 4 x top stacking mounts and mount securing pins supplied as standard accessories.
Source Compatibility 2D Graphics standards up to 4K-UHD 3840x2160 resolution at 60Hz via HDMI 2.0b, HDBaseT (4:2:0), DisplayPort inputs
3D Graphics standards up to dual-pipe WUXGA 60Hz for input (120Hz output) via HDMI 2.0 and Display Port inputs
12G-SDI is SMPTE 259M, 292M, 424M and ST-2082 compliant.

WUXGA mode
2D sources up to WUXGA 60Hz and 4K-UHD 60Hz can be displayed scaled to fit WUXGA
3D sources up to WUXGA 60Hz Input -120Hz output can be displayed scaled to fit WUXGA

4K-UHD mode
2D sources up to 4K (4096 x 2160) will be displayed scaled to fit 4K-UHD

Auto Mode
Sources greater than WUXGA will be displayed scaled to fit 4K-UHD
Inputs/Outputs
Video & Computer
Type Connector Qty
DisplayPort 1.2a (2D)
HDMI 2.0b
12G-SDI in
12G-SDI out
HDBaseT/LAN
DisplayPort
HDMI
BNC
BNC
RJ45
2
2
1
1
1
.
Communication & Control
Type Connector Qty
3D SYNC IN
3D Sync Out
LAN
RS-232
Wired Remote
12V Trigger
3D Sync IR Out
USB 5V 2A
BNC
BNC
RJ45
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
BNC
Type A
1
1
1
1
1
1
1
1
3D Formats Supported Sequential / 1080P/WUXGA @100Hz
Sequential / 1080P/WUXGA @120Hz
Dual-Pipe / 101080P/WUXGA80p @ 50Hz per eye
Dual-Pipe / 1080P/WUXGA @ 60Hz per eye
Also supports mandatory formats including side by side, top/bottom and frame packing

HDTV Formats Supported 1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz).
1080i (50Hz, 59.94Hz, 60Hz).
720p (50Hz, 59.94Hz, 60Hz).
4K-UHD (23.97Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 60Hz).
Computer Compatibility 2D 4K-UHD up to 60Hz
3D Supported Formats will be displayed up to WUXGA
Bandwidth 18Gb/s (600MHz clock rate) on HDMI
Remote Control Addressable IR remote Control, Wireless and wired. On-Board keypad
Automation Control LAN
RS-232
Alert E-Mails from Projector
Served webpage OSD functions for full Projector Control via web browser
LAN Control-Crestron Roomview™
LAN Control-Crestron eControl
LAN Control-PJ Link compatible
LAN Control-AMX SSDP
LAN to RS232 (RS232 by Telnet)
Concurrence Control for RS232/LAN
DMX Art-Net control
Scheduled On and Off times
Colour Temperature 3200K to 9300K
Operation
illumination Type Laser Light Source
Typical illumination Life 20,000 Hours (Normal Mode) 40,000 Hours (ECO Mode)
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.37:1 (Right Angled) 120-510 1.6m - 4.9m Vert: 0.65 (U) 0.65 (D) frame, Hor: 0.31 (L) 0.31 (R) frame
0.65-0.85:1 (Right Angled) 120-511 2.8m - 8.4m Vert: 0.62 (U) 0.62 (D) frame, Hor: 0.25 (L) 0.25 (R) frame
0.8-1.16:1 (Includes support bracket) 120-827 1.7m - 11m Vert: 0.51 (U) 0.51 (D) frame, Hor: 0.20 (L) 0.20 (R) frame
1.16 - 1.49:1 zoom HB 109-236 3m - 15m Vert: 0.50 (U) 0.408 (D) frame, Hor: 0.2 (L) 0.2 (R) frame
1.39 - 1.87:1 zoom HB 105-610 4m - 24m Vert: 0.65 (U) 0.65 (D) frame, Hor: 0.28 (L) 0.28 (R) frame
1.87 - 2.56:1 zoom HB 105-611 4m - 24m Vert: 0.65 (U) 0.65 (D) frame, Hor: 0.28 (L) 0.28 (R) frame
2.56 - 4.16:1 zoom HB 105-612 9.1m - 45m Vert: 0.65 (U) 0.65 (D) frame, Hor: 0.28 (L) 0.28 (R) frame
4.16 - 6.96:1 zoom HB 105-613 12m - 80m Vert: 0.65 (U) 0.65 (D) frame, Hor: 0.28 (L) 0.28 (R) frame
6.92 - 10.36:1 zoom HB 109-235 12m - 80m Vert: 0.65 (U) 0.45 (D) frame, Hor: 0.28 (L) 0.28 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorised Shift, Zoom and Focus. Intelligent Lens Memory with 10 user-definable pre-set positions for zoom lenses.
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 110V~130Vac/ 50~60Hz 180V~240Vac/ 50~60Hz single phase * Note that in 120V operation, the projector will be at ~25% brightness
Power Consumption 230V Typical: 3650W , Maximum 4000W
Thermal Dissipation Max 14160.38 BTU/hr @ 200VAC Max 3685 BTU/hr @ 110VAC
Fan Noise Max 54 dBA Eco Typ : 53 dBA (TBC)
Operating/Storage Temperature: Operating: Full Power 0°C ~ 35°C (32°F ~95°F), ECO upto 40°C (104°F)
Storage: -20°C ~ 60°C (-4°F ~ 140°F)
Operating Humidity Operating: 10% ~ 90% non-condensing Storage: 10% ~ 90% non-condensing
Weight 88 (without lens) kg / 194 (without lens) lbs
Dimensions L: 840mm, W: 650mm, H: 381mm (Excl handles)
L: 33.1in, W: 25.6in, H: 15in (Excl handles)
* See drawings for full details
Safety & EMC Regulations TBC
Accessories
Accessory Part No.
Infrared Remote Control (Replacement)
Optional lens mount insert for selected third party lenses (Contact local sales representative for further information)
118-678
119-729

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

User Guide

User Guides

User Guides (German)

User Guides (French)

User Guides (Korean)

User Guides (Japanese)

Laser Risk Group Document

Important Information