Click to Print This Page

logo
logo

 

E-Vision 6220 4K-UHD

6,500 ISO / 5,700 ANSI Lumens | Contrast Ratio: 3,000,000:1 (Dynamic Black) | Part Number: 124-452


Key Specifications:

Colour System: Laser Phosphor with colourwheel
Display Type: 1 x 0.65" 4K-UHD VSP DMD™
DMD Specification: 4K-UHD 3840 x 2160 (with optical actuator), 1920 x 1200 (Native resolution).

Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16:9
Fill Factor
Key Features:
Video & Graphics Processing
  • HDMI 2.0 (HDCP2.3)
  • 10-bit colour processing (30-bits per pixel) 1,073,741,824 colours
  • Hue, Saturation and Gain colour management
  • Texas Instruments BrilliantColor processing
  • 3840 x 2160 24Hz and 1080p 50/60Hz display support
  • HDR 10 support
  • Input source automaticaly detected
  • Selectable Dynamic Black
  • DICOM simulation mode
  • Golf mode
  • Optics engine sealed to IP6X

Geometry Correction
  • Vertical & Horizontal Keystone correction
  • Four Corner adjustment
  • Selectable aspect ratios: 4:3 / 16:9 / Letter Box / 21:9 / 16:10 / Auto
  • Blanking (Masking) control for custom input window sizing
  • Scaling for fixed aspect ratio screens.16:9 / 16:10 / 4:3 / 21.9:1
  • Warping
Edge Blending
  • Correction for non-active pixels at the edge of the display.
HDBaseT® Interface
  • Optional HDBaseT® Board - DHS-01
  • Has support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cab.
  • Allows the projector to be placed up to 100m from the source with low cost cabling
  • HDBaseT® Includes Ethernet 100BaseT and RS232/IR control.
Colour Processing
  • Powerful seven point colour correction for accurate colour matching
Projector LAN Controller Software
  • Free Digital Projection Projector Controller II software
  • Intuitive user interface for network control
  • At-a-glance monitoring of projector status
  • Simultaneous control of user-defined groups of projectors.
Projector Automation
  • Graphics standards including WUXGA 1920 x 1200 - 120Hz RB and support up to 3840 x 2160 60Hz
  • HDTV video standards HDTV 720p 50/60Hz, 1080p 50/60Hz
  • 4K-UHD (3840 x 2160) 50/60Hz
Source Compatibility Graphics standards including WUXGA 1920 x 1200 - 120Hz RB and support up to 3840 x 2160 60Hz

HDTV video standards HDTV 720p 50/60Hz, 1080p 50/60Hz

Support for up to 4K-UHD (3840 x 2160) 50/60Hz

Inputs/Outputs
Video & Computer
Type Connector Qty
HDMI 2.0 (HDCP 2.3 compatible)
HDMI Out
3D Sync Out
HDBaseT (Optional)
Wi-Fi for screen sharing (Optional)
Audio Out
Internal Speaker
HDMI
HDMI
3-Pin Din
8P8C "RJ45"
N/A
3.5mm Mini Jack
N/A
2
1
1
(Optional SDM Slot Board)
(Optional SDM Slot Board)
1
1
.
Communication & Control
Type Connector Qty
LAN
Serial RS-232C In
USB Power out 5V/2.0A
8P8C "RJ45"
9-pin D-Sub
USB Type A
1
1
1

3D Formats Supported Auto

Top & Bottom

Frame Sequential

Frame Packing

Side by Side

DLP Link or IR Sync Output

HDTV Formats Supported EDTV (480p)
HDTV (720p, 1080i, 1080p)
4K-UHD (3840 x 2160)
Computer Compatibility VGA, SVGA, XGA, WXGA, WXGA+, SXGA, SXGA+, WSXGA+, Full HD, UXGA, WSXGA+, WUXGA, 4K-UHD
Bandwidth TBD
Remote Control Infrared Remote Control Unit
Automation Control LAN - Webpage control

TCP/UDP control via protocol commands

RS-232

Alert Mail for Projector

LAN Control - Crestron Connected

LAN Control - Extron

LAN Control-PJ Link Class 1 compatible

LAN Control-AMX Device Discovery SSDP

Onboard constant Brightness control

Colour Temperature User selectable (Warm / Normal / Cold )
Operation
illumination Type Laser Light Source
Typical illumination Life 30,000 hours
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
1.15 - 1.9 :1 zoom (Standard) with 115% offset K1U-1119 1.48m - 6.29m Vert: 0.15 (U) 0.05 (D) frame

Hor: 0.02 (L) 0.02 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Manual focus and zoom
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 100-240VAC 50/60Hz single phase
Power Consumption At 110VAC - Typical TBDW, Max TBDW in Normal mode
At 110VAC - Typical TBDW, Max TBDW in Eco mode
At 220VAC - Typical TBDW, Max TBDW in Normal mode
At 220VAC - Typical TBDW, Max TBDW in Eco mode
<0.5W in Eco Standby mode, <2W in Normal (Network Standby) mode
Thermal Dissipation At 110VAC - Typical TBD BTU/hr, Max TBD BTU/hr in Normal mode
At 110VAC - Typical TBD BTU/hr, Max TBD BTU/hr in Eco mode
At 220VAC - Typical TBD BTU/hr, Max TBD BTU/hr in Normal mode
At 220VAC - Typical TBD BTU/hr, Max TBD BTU/hr in Eco mode
Fan Noise Typical 35dBA in Normal Mode / Typical 31dBA in Eco mode
Operating/Storage Temperature: Operating: 5 to 35C (32 to 95F)
Storage: -20 to 60C (-4 to 140F)
Operating Humidity 10 to 85% non-condensing
5% to 95% non-condensing
Weight 13 kg / 28.7 lbs
Dimensions L: 380mm x W: 496mm x H:160mm (not including feet and upper hood)

L: 14.96 inch x W: 19.52 inch x H: 6.29 inch (not including feet and upper hood)
Safety & EMC Regulations CE, C-Tick, FCC Class A, CCC, CB, KC/KCC, CEL, CECP, BIS, PSB, BSMI, cTUVus, RoHS
Accessories
Accessory Part No.

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads
User Guide