Click to Print This Page



E-Vision 16000i WU (Preliminary)

16,000 ISO / 14,500 ANSI Lumens | Contrast Ratio: 20,000:1 (Dynamic Black) | Part Number: 123-522

Key Specifications:

Colour System: Laser Phosphor with Colorboost (Red Laser).
Phosphor wheel: 2 x 7200rpm (120Hz)
Colour wheel: 4 Segment RGBY 2 x 7200rpm (120Hz)
Display Type: 1 x 0.8" HEP DMD™(High Efficency Pixel)
DMD Specification: 1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x10
Fill Factor 87%
Key Features:
Video & Graphics Processing
  • Nexus electronics platform
  • HDMI 2.0
  • DisplayPort 1.2
  • 10-bit colour processing (30-bits per pixel) 1,073,741,824 colours
  • Hue, Saturation and Gain colour management.
  • 24p and 1080p native display.
  • HDR support
  • Input source automaticaly detected
  • Selectable Dynamic Black
  • Syncronisation of active glasses or polarising switcher.
  • DICOM simulation mode
  • Optics engine sealed to IP6X
Geometry Correction
  • Vertical & Horizontal Keystone correction
  • Four Corner adjustment
  • Rotation -100 to +100 with +/- 0.25° per step
  • Selectable aspect ratios: 5:4 / 4:3 / 16:10 /16:9 / 1.88 / 2.35 / TheaterScope / Source / Unscaled
  • Digital Zoom 0% ~ 100%
  • Blanking control for custom input window sizing.
  • Scaling for fixed aspect ratio screens.16:10 / 16:9 / 4:3 / 2.35:1
  • Custom warp
Edge Blending
  • Correction for non-active pixels at the edge of the display.
HDBaseT® Interface
  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
  • Allows the projector to be placed up to 100m from the source with low cost cabling.
  • HDBaseT® Includes Ethernet 100BaseT and RS232/IR control.
Colour Processing
  • Powerful seven point colour correction for accurate colour matching.
Projector LAN Control
  • Free Digital Projection Projector Controller II software
  • Intuitive user interface for network control.
  • At-a-glance monitoring of projector status.
  • Simultaneous control of user-defined groups of projectors.
Source Compatibility 3G-SDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.

Graphics standards up to WUXGA 1920 x 1200 - 120Hz RB, Up to WQXGA 2560 x 1600 60Hz RB (DisplayPort)

Video standards up to up to HDTV 1080p - 60Hz, with support for 2K (2048 x 1080) 60Hz and 4K-UHD (3840 x 2160) 60Hz

Display Support for for 2K (2048 x 1080) 60Hz and 4K-UHD (3840 x 2160) 60Hz
Video & Computer
Type Connector Qty
HDMI 2.0
DisplayPort 1.2
3G-SDI in
3G-SDI out
8P8C "RJ45"
Communication & Control
Type Connector Qty
3D Sync In
3D Sync Out
3D Sync IR
LAN / Art-Net
Serial In RS-232C
Serial Out RS-232C
Wired Remote In
Wired Remote Out
12V Trigger
USB Power out 5V/2A
EtherCON RJ45
9-pin D-Sub
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A
3D Formats Supported Off
Side by Side
Top and Bottom
Dual Pipe
Frame Sequential
HDTV Formats Supported SDTV (480i, 576i), EDTV (480p, 576p), HDTV (720p, 1080i, 1080p), NTSC (M, 3.58/4.43 MHz), PAL (B,D,G,H,I,M,N), SECAM (B,D,G,K,K1,L) Display Support for 2K 2048 x 1080 up to 60Hz and 4K-UHD 3840 x 2160 up to 60Hz
Computer Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA up to 120hz RB, Mac
Remote Control Infrared Remote Control Unit
Automation Control LAN - Webpage control
TCP/UDP control
Alert Mail for Projector
LAN Control-Crestron® Connected
LAN Control-PJ Link Class 1 compatible
LAN Control-AMX® Device Discovery
Art-Net (DMX) control
Colour Temperature User selectable (3200K/ 5400K / 6500K / 7500K / 9300K / Native )
illumination Type Laser Phosphor. ECO mode support (80% Brightness)
Typical illumination Life 20,000 hours
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.63 - 0.78 :1 zoom 115-339 1.02m - 12.7m Vert: 0.35 (U) 0.35 (D) frame, Hor: 0.15(L) 0.15 (R) frame
1.05 - 1.5 :1 zoom 112-500 1.33m - 11.73m Vert: 0.45 (U) 0.45 (D) frame, Hor: 0.15(L) 0.15 (R) frame
1.45 - 1.9 :1 zoom 112-501 1.83m - 14.9m Vert: 0.45 (U) 0.45 (D) frame, Hor: 0.2(L) 0.2 (R) frame
1.86 - 3.08 :1 zoom 112-502 2.36m - 24.2m Vert: 0.45 (U) 0.45 (D) frame, Hor: 0.2(L) 0.2 (R) frame
3.0 - 4.52 :1 zoom 112-503 3.8m - 35.35m Vert: 0.45 (U) 0.45 (D) frame, Hor: 0.2(L) 0.2 (R) frame
4.46 ~ 6.94 : 1 zoom 112-504 5.59m - 54.8m Vert: 0.45 (U) 0.42 (D) frame, Hor: 0.2(L) 0.2 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Centred lens for installation flexability
Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Ceiling Mount compatible chassis with 6 off M4*0.7 mounting holes available, Maximum screw length 16mm
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 100-240VAC 50/60Hz single phase 6.8A
Power Consumption At 100VAC - Typical 960W, Max 1056W in Normal mode
At 100VAC - Typical 760W, Max 836W in Eco mode
At 100VAC - Typical 780W, Max 858W in High Altitude Mode
At 220VAC - Typical 930W, Max 1023W in Normal mode
At 220VAC - Typical 730W, Max 803W in Eco mode
At 220VAC - Typical 750W, Max 825W in High Altitude Mode
<0.5W in Super Eco mode, <3W in Eco mode, < 25W in Normal mode
Thermal Dissipation At 100VAC - Typical 3276 BTU/hr, Max 3604 BTU/hr in Normal mode
At 100VAC - Typical 2595 BTU/hr, Max 2853 BTU/hr in Eco mode
At 100VAC - Typical 2662 BTU/hr, Max 2928 BTU/hr in High Altitude Mode
At 220VAC - Typical 3174 BTU/hr, Max 3492 BTU/hr in Normal mode
At 220VAC - Typical 2491 BTU/hr, Max 2740 BTU/hr in Eco mode
At 220VAC - Typical 2560 BTU/hr, Max 2816 BTU/hr in High Altitude Mode
Fan Noise Normal mode: 39 dBA typical, Max 41 dBA
Eco Mode: 36 dBA typique / Max 38 dBA
Operating/Storage Temperature: Operating: 0 to 40 °C (32 to 104 °F)
Force ECO over 35°C (95°°F)
Operating Humidity 90% (with maximum temperature of 35°C (95°F)
Weight 29.4 kg / 64.8 lbs
Dimensions L: 598mm x W: 500mm x H:218mm
L: 23.54 inch x W: 19.68 inch x H: 8.58 inch
Safety & EMC Regulations cTUVus, CB report, CCC (China), CECP (China Energy Conservation Program), CELP (China Environmental Labeling Program), China RoHS, FCC part 15 Class A, FDA 21 CFR part 1040 (Except with respect to those characteristics authorised by Variance Number FDA-2024-V-0726, CE (European Economic Area), UKCA (United Kingdom), KC (Korea), BSMI (Taiwan), RCM (Australia),IEC 60825-1 : 2014 - Class 1 Laser Product, IEC EN 62471-5:2015 - Risk Group 2< br/>
This projector may become Risk Group 3 when an interchangeable lens with a throw ratio of greater than 2.12:1 is installed
Such combinations of projector and lens are intended for professional use only and are not intended for consumer use.
Accessory Part No.

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

User Guide