|
Titan Luma 37000 WUXGA
37,000 ISO / 33,000 ANSI Lumens | Contrast Ratio: 18,000:1 (Dynamic Black) / 2,000:1 Native | Part Number: TBC
|
Key Specifications:
|
| Colour System: |
Laser Phosphor & Red Laser |
| Display Type: |
3 x 0.96" WUXGA DMD™
|
| DMD Specification: |
Display capability upto WUXGA
2.3 megapixels pixels on screen at WUXGA
Fast transit pixels for smooth greyscale and improved contrast.
Display resolutions WUXGA (1920 x 1200) |
| Aspect Ratio: |
16x10 |
| Fill Factor |
87% |
| Key Features: |
Video & Graphics Processing
- HDMI 2.0 compliance for Side by Side, Frame Packing, Frame Sequential and TopBottom 3D Formats.
- DisplayPort 1.2 with HDCP 2.2 compliance.
- 10-bit colour processing (30-bits per pixel).
- Support for 1080p 24Hz native display.
- Support for 4K 4096 x 2160 resolution. Output will be scaled to WUXGA
- HDR support
- Input source automatically detected.
- Input redundancy mode with auto switching.
- Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
- Syncronisation of active 3D glasses or polarising switcher.
- DICOM simulation mode.
- Sealed light engine
General Features
- Constant Brightness control
- Multi Projector brightness and colour control.
- Compatible with selected 3rd party lenses via lens converter
- Selectable EDID
- Custom Start-up Logo
- Smear Reduction (fast frame) (2D Only)
- Electronic PIC MUTE with selectable fade in/out timers
- On board 4 -line LCD display for at a glance status
Geometry Correction
- Vertical & Horizontal Keystone correction.
- Four Corner adjustment.
- Rotation.
- Pin/Barrel.
- Wall Corner adjustment.
- Centre Shift (Horizontal and Vertical linearity adjustment).
- Custom Warp.
- Upload of maps for warp, blend, uniformity and masking.
- Selectable aspect ratios: 5:4 / 4:3 / 16:10 /16:9 / 1.88 / 2.35 / TheaterScope / Source / Unscaled.
- Digital Zoom.
- Blanking control for custom input window sizing.
Edge Blending
- Blending control available for all sides with width control.
- Correction for non-active pixels at the edge of the display.
- Electronic Black Level Compensation.
- Upload of Blend Maps including Blend, Uniformity, Masking, Pixel by Pixel
HDBaseT® Interface
- Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable
- Allows projector to be placed up to 100m from source with low cost cabling
- Supports up to 4K 4096 x 2160@60Hz 4:2:0 or 4K 4096 x 2160@30Hz 4:2:2
- Includes Ethernet 100BaseT and RS232/IR control.
Colour Processing
- Four colour modes available
- Powerful seven point colour correction for accurate colour matching with presets.
- Easy colour temperature selection
- Manual seven point colour adjustment
- Traditional lifts and gains
Projector Controller Software
- Intuitive user interface for network control
- Simultaneous control of user-defined groups of projectors
- At-a-glance monitoring of projector status
Projector Automation
- Real-time clock provides daily on/off automation
- E-mail alerts for system status
Installation
- 4 x eye bolts fitted for easy rigging.
- 4 x top stacking mounts and mount securing pins supplied as standard accessories.
|
| Source Compatibility |
2D Graphics standards up to 4K-UHD 3840x2160 resolution at 60Hz via HDMI 2.0, HDBaseT (4:2:0), DisplayPort inputs
3D Graphics standards up to dual-pipe WUXGA 120Hz via HDMI 1.4b inputs
3G-SDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
|
| Inputs/Outputs |
| Video & Computer |
| Type |
Connector |
Qty |
DisplayPort 1.2a (2D)
HDMI 2.0b
12G-SDI in
12G-SDI out
HDBaseT/LAN |
DisplayPort
HDMI
BNC
BNC
RJ45 |
2
2
1
1
1 |
.
| Communication & Control |
| Type |
Connector |
Qty |
3D SYNC IN
3D Sync Out
LAN
RS-232
Wired Remote
12V Trigger
3D Sync IR Out
USB 5V 2A |
BNC
BNC
RJ45
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
BNC
Type A |
1
1
1
1
1
1
1
1 |
|
| 3D Formats Supported |
Sequential / 1080p @100Hz
Sequential / 1080p @120Hz
Sequential / WUXGA @100Hz (RB)
Dual -Pipe / 1080p @ 50Hz
Dual -Pipe / 1080p @ 60Hz
Dual -Pipe / WUXGA @ 50Hz (RB)
Dual -Pipe / WUXGA @ 60Hz
|
| HDTV Formats Supported |
1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
1080i (50Hz, 60Hz)
720p (50Hz, 60Hz)
2K (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
4K-UHD (24Hz, 25Hz, 30Hz, 50Hz, 60Hz) |
| Computer Compatibility |
2D
4K-UHD upto 60Hz
3D
Supported Formats will be displayed upto WUXGA |
| Bandwidth |
TBC |
| Remote Control |
Addressable IR remote Control, Wireless and wired. On-Board keypad |
| Automation Control |
Crestron RoomView Connected
LAN
RS-232
AMX (Device Discovery)
DMX Art-Net
Served web pages (Projector status, Projector control, Crestron RoomView, Network settings, Alert mail setup, Time setup, Error log, On screen Display ) |
| Colour Temperature |
TBC |
| Operation |
 |
| illumination Type |
Laser Light Source |
| Typical illumination Life |
20,000 hours |
| Lenses |
| Lens |
Part No. |
Optimised Focus Range* |
Lens Shift (Frame) |
| 0.37:1 (Right Angled) |
120-510 |
1.6m - 4.9m |
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.31 (L) 0.31 (R) frame |
| 0.65-0.85:1 (Right Angled) |
120-511 |
2.8m - 8.4m |
Vert: 0.51 (U) 0.51 (D) frame, Hor: 0.24 (L) 0.24 (R) frame |
| 0.8-1.16:1 (Includes support bracket) |
120-827 |
1.7m - 11m |
Vert: 0.4 (U) 0.4 (D) frame, Hor: 0.19 (L) 0.19 (R) frame |
| 0.67:1 fixed HB |
105-607 |
1.1m - 10m |
Vert: 0.108 (U) 0.108 (D) frame, Hor: 0.044 (L) 0.044 (R) frame |
| 1.12:1 (short) fixed HB |
105-608 |
3m - 15m |
Vert: 0.567 (U) 0.567 (D) frame, Hor: 0.273 (L) 0.273 (R) frame |
| 1.16 - 1.49:1 zoom HB |
109-236 |
3m - 15m |
Vert: 0.408 (U) 0.408 (D) frame, Hor: 0.188 (L) 0.188 (R) frame |
| 1.39 - 1.87:1 zoom HB |
105-610 |
4m - 24m |
Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.273 (L) 0.273 (R) frame |
| 1.87 - 2.56:1 zoom HB |
105-611 |
4m - 24m |
Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.273 (L) 0.273 (R) frame |
| 2.56 - 4.16:1 zoom HB |
105-612 |
9.1m - 45m |
Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.273 (L) 0.273 (R) frame |
| 4.16 - 6.96:1 zoom HB |
105-613 |
12m - 80m |
Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.273 (L) 0.273 (R) frame |
| 6.92 - 10.36:1 zoom HB |
109-235 |
12m - 80m |
Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.273 (L) 0.273 (R) frame |
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
|
| Lens Mount |
Motorised Shift, Zoom and Focus.
Intelligent Lens Memory with 10 user-definable pre-set positions for zoom lenses. |
| Mechanical Mounting |
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet |
| Orientation |
Table Top or Inverted: Yes
Pointing Up: Yes
Pointing Down: Yes
Roll (Portrait): Yes |
| Power Requirements |
200VAC to 240VAC, 50/60Hz single phase |
| Power Consumption |
Typical: 2400W , Maximum 2250W
|
| Thermal Dissipation |
TBC |
| Fan Noise |
Normal Mode: 49dBA, Max 51dBA
Eco Typ: 46dBA |
| Operating/Storage Temperature: |
TBC |
| Operating Humidity |
Operating: 10% ~ 90% non-condensing
Storage: 10% ~ 90% non-condensing |
| Weight |
54.5 kg / 120.1 lbs |
| Dimensions |
L: 760mm, W: 525mm, H: 318mm (Excl handles)
L: 38.2in, W: 25.6in, H: 15.6in (Excl handles) |
| Safety & EMC Regulations |
UL, CB, CCC, KC, RoHS (CN), FCC Class A, FDA, CE, IEC EN 60825-1 Class 3R Laser Product, IEC EN 62471-5 Risk Group 3, WEEE (UK) |
| Accessories |
| Accessory |
Part No. |
Remote Control (with Battery)
HDMI Cable (1x 2m)
Lens Cap/Hole Cap (Without Lens)
AC Power Cord (US Type x 1 or EU Type x 1 or China Type x 1)
Important Information Booklet |
|
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.
|
| Downloads |
|
| User Guide |
|
|
|
|
|