Colour System: |
3-chip DLP® |
Display Type: |
3 x 0.67" DarkChip™ DMD™
|
DMD Specification: |
1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast. |
Aspect Ratio: |
16x10 |
Fill Factor |
87% |
Key Features: |
Video & Graphics Processing
- HDMI 1.4 for Side by Side, Frame Packing & Top Bottom for 3D formats.
- Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources.
- Dual Pipe Processing: Two sources in parallel for Left and Right Eyes.
- Synchronisation of active glasses.
- High bandwidth digital inputs.
- 3GSDI with loop-through.
- The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.
- 24p and 1080p native display.
Geometry Correction
- Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
- Blanking control for custom input window sizing.
Edge Blending
- Correction for non-active pixels at the edge of the display.
- Electronic black level compensation.
HDBaseT® Interface
- Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
- Allows projector to be placed up to 80m from source with low cost cabling.
ColorMax™
- Accurate matching of projectors in tiled or blended applications.
- User selection and storage of primary and secondary color targets.
Projector Control
- Infra-red and wired remote.
- LAN control via protocol.
- Network control via hosted web page.
- Built-in ON/OFF timer for automatic start and switch off.
Projector Controller Software
- Intuitive user interface for network control.
- Simultaneous control of user-defined groups of projectors.
- At-a-glance monitoring of projector status.
|
Source Compatibility |
HDMI including Deep Color™ processing and 3D standards.
DisplayPort accepts graphics standards up to 1920 x 1200 at 120Hz.
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
Graphics standards up to 1920 x 1200 resolution via DisplayPort, HDMI or VGA.
Component Video (SD and HD) via YPrPb or RGB.
|
Inputs/Outputs |
Video & Computer |
Type |
Connector |
Qty |
HDMI 1.4
DisplayPort 1.1a
HDBaseT/LAN
3G-SDI In
3G-SDI Out
VGA
Component Video |
HDMI
DisplayPort
RJ45
BNC
BNC
15-pin D-Sub
3 x BNC |
2
1
1
1
1
1
1 |
.
Communication & Control |
Type |
Connector |
Qty |
3D Sync Out
3D Sync In
LAN (see HDBaseT)
RS232
Wired Remote
12V Trigger
Service Port
NOTE: The LAN port is shared with HDBase-T. |
BNC
BNC
RJ45
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A |
1
1
1
1
1
2
1 |
|
3D Formats Supported |
Frame Packing Dual Pipe Frame Sequential Side By Side (half) Top and Bottom |
HDTV Formats Supported |
1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 720p (50Hz, 59.94Hz, 60Hz) |
Computer Compatibility |
Up to 1920 x 1200 |
Bandwidth |
170 MHz on analog RGB
165 Megapixels per second on HDMI
295 Megapixels per second on DisplayPort |
Remote Control |
Addressable IR remote control, wireless and wired
On-Board keypad |
Automation Control |
LAN
RS232 |
Colour Temperature |
User selectable from 3200 to 9300K |
Operation |
|
illumination Type |
Laser Light Source |
Typical illumination Life |
20,000 hours |
Lenses |
Lens |
Part No. |
Optimised Focus Range* |
Lens Shift (Frame) |
0.77 : 1 fixed HB |
110-808 |
1.3m - 15.0m |
Vert: 0.2 (U) 0.2 (D) frame, Hor: 0.05 (L) 0.05 (R) frame |
1.16 : 1 fixed HB |
110-809 |
1.4m - 25.0m |
Vert: 0.2 (U) 0.2 (D) frame, Hor: 0.05 (L) 0.05 (R) frame |
1.45 - 1.74 : 1 zoom HB |
110-803 |
1.8m - 9.3m |
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
1.74 - 2.17 : 1 zoom HB |
112-878 |
2.2m - 11.8m |
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
2.17 - 2.90 : 1 zoom HB |
113-852 |
2.7m - 15.4m |
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
2.90 - 4.34 : 1 zoom HB |
110-806 |
3.6m - 22.5m |
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
4.34 - 6.76 : 1 zoom HB |
110-807 |
5.5m - 35m |
Vert: 0.6 (U) 0.6 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
|
Lens Mount |
Motorised shift, zoom and focus. |
Mechanical Mounting |
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet |
Orientation |
Table Top or Inverted: Yes
Pointing Up: Yes
Pointing Down: Yes
Roll (Portrait): Yes |
Power Requirements |
110 - 240VAC 50/60Hz single phaseAt 110V the light output is up to 70% of full power. |
Power Consumption |
1700 |
Thermal Dissipation |
5800 |
Fan Noise |
52 dBA |
Operating/Storage Temperature: |
Operating: 0 to 35C (32 to 95F)
Storage: -20 to 60C (-4 to 140F) |
Operating Humidity |
20% to 90% non-condensing |
Weight |
55 kg / 121.3 lbs |
Dimensions |
H: 26.5 cm W: 58.5 cm L: 71.0 cm (92.7 cm w/lens hood)
H: 10.4 in W: 23.0 in L: 28.0 in (36.5 in w/lens hood) |
Safety & EMC Regulations |
CE, FCC Class A , UL, CCC, KC, BIS |
Accessories |
Accessory |
Part No. |
RapidRig™ Frame
Infrared Remote (replacement)
Replacement Filter Set |
TBD
117-780
115-761 |
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.
|
Downloads |
PDF CAD Drawings
AUTOCAD Drawings
STEP / IGS Drawings
Rigging Frame CAD Drawings Rigging Frame CAD Drawings
Lens CAD Drawings
|
User Guide |
User Guides
User Guides (Korean)
Laser Risk Group Document
Important Information
Control Protocol
Control Protocol
|