Click to Print This Page



E-Vision Laser 4K-UHD Black

7,000 ANSI / 7,500 ISO Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) 1,000:1 native | Part Number: 118-150

Key Specifications:

Colour System: Laser Phosphor with colourwheel
Display Type: 1 x 0.66" WQXGA+ TRP UHD DMD™
DMD Specification: Display resolutions 4K-UHD (3840 x 2160)
or WQXGA+ (2716 x 1528)
8.3 megapixels on screen at 4K-UHD
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16:9
Fill Factor Not applicable: Smooth Picture DMD™
Key Features:
Video & Graphics Processing
  • HDR processing
  • Two projectors in one - 4K-UHD and WQXGA+.
  • DisplayPort 1.2.
  • 2 x HDMI 2.0.
  • 2 x HDMI 1.4b for Dual Pipe processing and Frame Sequential 3D format.
  • Sequential Processing: 3D via single HDMI 1.4b input.
  • Dual Pipe Processing: 3D Left and Right Eyes via two HDMI 1.4b inputs.
  • Synchronisation of active glasses.
  • 3G-SDI with loop-through.
  • DICOM simulation mode.

Geometry Correction
  • Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc and Image Rotation.
  • Non-linear warp.
  • Digital zoom, pan and scan.
  • Blanking control for custom input window sizing.
  • Scaling available for fixed aspect ratio screens.
  • Unscaled processing for pixel mapped display.
Edge Blending
  • Blending control available for all sides with width control.
  • Correction for non-active pixels at the edge of the display.
Picture in Picture
  • Two sources can be displayed simultaneously using 2D inputs: either picture in picture (PIP), or side by side (PBP), with original aspect ratios maintained.
HDBaseT® Interface
  • Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
  • Allows projector to be placed up to 100m from source with low cost cabling.
  • Supports up to 4K UHD 3840 x 2160@60Hz 4:2:0 or 4K UHD 3840 x 2160@30Hz 4:4:4
Colour Processing
  • Four colour modes available.
  • Powerful seven point colour correction for accurate colour matching with presets.
  • Easy colour temperature selection.
  • Manual seven point colour adjustment.
  • Traditional lifts and gains.
Projector Controller Software
  • Intuitive user interface for network control.
  • Simultaneous control of user-defined groups of projectors.
  • At-a-glance monitoring of projector status.
Projector Automation
  • Real-time clock provides daily on/off automation.
  • E-mail alerts for system status.
Source Compatibility 2D graphics standards up to 4K-UHD 3840 x 2160 resolution at 60Hz via HDMI 2.0, HDBaseT (4:2:0) and DisplayPort inputs.
3D graphics standards up to WQXGA at 120Hz DualPipe via HDMI 1.4b inputs.
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
WQXGA+ mode
2D sources up to WQXGA+ at 120Hz can be displayed scaled to fit WQXGA+.
3D sources up to WQXGA at 120Hz can be displayed scaled to fit WQXGA+.
4K-UHD mode
2D sources up to 4K-UHD will be displayed scaled to fit 4K-UHD.
Auto mode
Sources greater than WQXGA+ will be displayed scaled to fit 4K-UHD.
Sources up to WQXGA+ will be displayed scaled to fit WQXGA+.
Video & Computer
Type Connector Qty
DisplayPort 1.2 (2D)
HDMI 1.4b (3D)
HDMI 2.0 (2D)
3G-SDI in (2D)
3G-SDI out
HDBaseT (see LAN) (2D)
Communication & Control
Type Connector Qty
3D Sync Out
3D Sync In
Wired Remote
12V Trigger
3D Sync IR Out

NOTE: One of the LAN ports is shared with HDBase-T.
9-pin D Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
3D Formats Supported
Frame Sequential
HDTV Formats Supported 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz, 100Hz, 120Hz)
1080i (50Hz, 60Hz)
720p (50, 60Hz)
2K (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
4K-UHD (24Hz, 25Hz, 30Hz, 50Hz, 60Hz)
Computer Compatibility 2D
4K-UHD up to 60Hz.
WQXGA+ up to 120Hz.
Supported formats will be displayed within WQXGA+.
Bandwidth 498 megapixels per second via DisplayPort and HDMI 2.0.
Remote Control Addressable IR remote control, wireless and wired.
On-Board keypad
Automation Control Crestron RoomView® Connected
PJLink Class 1
AMX (Device Discovery)
Served web pages (projector status, projector control, Crestron RoomView®, network settings, alert mail setup, time setup, error log, On Screen Display)
Colour Temperature 3200K to 9300K
illumination Type Laser Light Source
Typical illumination Life 20,000 hours
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.38 :1 fixed 117-341 0.68m - 2.44m Depends on image size, see Installation Guide.
0.74 - 0.93 :1 zoom 115-339 1.02m - 12.7m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
0.76 :1 fixed 112-499 0.81m - 5.08m none
1.24 - 1.78 :1 zoom 112-500 1.33m - 11.73m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
1.71 - 2.25 :1 zoom 112-501 1.83m - 14.9m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
2.2 - 3.67 :1 zoom 112-502 2.36m - 24.2m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
3.54 - 5.36 :1 zoom 112-503 3.8m - 35.35m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame
5.24 - 8.27 :1 zoom 112-504 5.59m - 54.8m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.1(L) 0.2 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).
Mechanical Mounting Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 100-130VAC and 200-240VAC selectable, 50/60Hz single phase
Power Consumption 950 W @220 Vac (1000 W @110 Vac)
Thermal Dissipation Max 3139 BTU/hour @100 VAC
Max 3002 BTU/hour @240 VAC
Fan Noise Smooth Picture On:
Normal mode: typical 40 (max 42) dBA
Eco2 mode: typical 37 (max 39) dBA
Smooth Picture Off:
Normal mode: typical 38 (max 40) dBA
Eco2 mode: typical 34 (max 36) dBA
Operating/Storage Temperature: Operating: 5 to 40C (41 to 104F)
Storage: -10 to 60C (14 to 140F)
Operating Humidity 10 to 85% non-condensing
Weight 28.15 kg / 62 lbs
Dimensions L: 59.83 cm x W: 50 cm x H: 21.85 cm
L: 23.55 in x W: 19.68 in x H: 8.60 in
Safety & EMC Regulations CE, FCC Class A, CCC, UL/cUL, FDA CB, KC, CEL, CECP
Accessory Part No.
Infrared Remote (replacement)

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.


PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Lens CAD Drawings

User Guide

User Guides

Laser Risk Group Document

Important Information

Important Information (Korean)

Control Protocol

Ultra Short Throw Lens

Ultra Short Throw Lens Installation Guide