E-Vision 4000 4K-UHD

3,300 ANSI / 3,800 ISO Lumens | Contrast Ratio: 500,000:1 Advanced Black. 1,300:1 native | Part Number: 121-804

Key Specifications:

Colour System:

Laser Phosphor

Display Type:

1 x 0.47" DarkChip 3™ DMD™

DMD Specification:

3840 x 2160

Aspect Ratio:

16x9

Fill Factor

Key Features:

4K-UHD
Lens included 1.27 (Wide) - 1.7:1 (Tele)
Compact quiet projector, ideal for residential applications

Video & Graphics Processing

2 x HDMI with HDCP
3D support for Side by Side, Frame Packing and Top and Bottom formats
HDR processing
MEMC for enhanced motion performance
Synchronisation of active 3D glasses
DICOM simulation mode

Geometry Correction

Vertical Keystone correction adjustment
Selectable 16:9, 4:3, Letterbox and Full Screen aspect ratios
Digital Zoom +10 ~ -10

HDBaseT® Interface

Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable
Allows the projector to be placed up to 100m from the source with low cost cabling
HDBaseT® includes audio, Ethernet 100BaseT and RS232/IR control

Colour Processing

6 Segment (WGYWGY) Phosphor wheel
8 Segment (BGYRBGYR) Colour wheel
10-bit colour display (30 bits per pixel : 1,073,441,824 colours)
Powerful seven point colour correction for accurate colour matching

Source Compatibility

Graphics standards up to 1920 x 1200 resolution at 60Hz.
Input support for 4K-UHD, 3840 x 2160 and 4096 x 2160 at 60 Hz.

Inputs/Outputs

Video & Computer
Type	Connector	Qty
HDMI 2.1 VGA / Analog RGB HDBaseT USB Type A / (5V/2A) NOTE: The USB is to power external interfaces. Audio: Audio IN L+R Audio OUT (variable) Speaker	HDMI 15-pin D-Sub RJ45 USB Type A 3.5 mm jack 3.5 mm jack 10W speaker	2 1 1 1 1 1 1

Communication & Control
Type	Connector	Qty
LAN RS-232C USB (for Service) 3D Sync Out 12V Trigger NOTE: The HDBaseT and LAN ports are seperate.	RJ45 9-pin D-sub Mini B VESA 3-PIN mini DIN 3.5mm jack	1 1 1 1 1

3D Formats Supported

Frame Packing
Side By Side (half)
Top and Bottom

HDTV Formats Supported

1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz) 1080i (50Hz, 60Hz) 720p (50Hz, 60Hz)

Computer Compatibility

VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA@60hz

Bandwidth

Remote Control

IR remote control, 2 x IR receivers

Automation Control

LAN control - Crestron RoomView® Connected
LAN control - Crestron eControl
LAN control - Extron
LAN control to RS232 by Telnet
HDBaseT communication
Projector status email alerts
PJ Link (Class1)

Colour Temperature

Warm / Normal / Cold

Operation

illumination Type

Laser Light Source

Typical illumination Life

20,000 hours

Lenses

Lens	Part No.	Optimised Focus Range*	Lens Shift (Frame)
1.13 - 1.7:1	N/A	1.6m - 8m	Vert: 0.60 (U) 0.60 (D) frame, Hor: 0.20 (L) 0.20 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount

Manual vertical and horizontal shift, with manual focus and zoom

Mechanical Mounting

Front/Rear
Front/Rear Ceiling
Two adjustable front feet
Ceiling Mount compatible chassis with 4 off M4 mounting holes

Orientation

Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes

Power Requirements

100-240VAC 50/60Hz single phase

Power Consumption

Normal Mode (100%): 538W@240VAC, 570W@100VAC

Thermal Dissipation

Normal Mode (typical):
1945 BTU/Hour @ 100VAC
1836 BTU/Hour @ 240VAC

Fan Noise

Normal Mode (Typical): 35 dBA / Max: 37 dBA

Operating/Storage Temperature:

Operating: 0° to 40°C (32°F to 104°F)
Storage: -10° to 60°C (14°F to 140°F)

Operating Humidity

10% to 85% non-condensing

Weight

12 kg / 26.45 lbs

Dimensions

L: 405 mm W: 480 mm H: 180 mm
L: 15.94 in W: 18.89 in H: 7.08 in

Safety & EMC Regulations

UL/cUL, CB, CCC, FCC Class B, FDA, CE, UKCA, BSMI IEC 60825-1:2007 3R
IEC 60825-1:2014 Class 1
IEC EN 62471-5 Risk Group 2
GB 7247.1-2012
RCM

Accessories

Accessory	Part No.
Infrared Remote (replacement)	122-755

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

User Guide

Laser Risk Group Document

Control Protocol