Click to Print This Page

Digital Projection Logo

Specification Sheet


E-Vision Laser 5100 WUXGA

4,500 ANSI / 5,100 ISO Lumens | Contrast Ratio: 2,000:1 Native 20,000:1 Dynamic | Part Number: 120-552

4,500 ANSI / 5,100 ISO Lumens | Contrast Ratio: 2,000:1 Native 20,000:1 Dynamic | Part Number: 120-552

Colour System: DMD Specification:
Laser Phosphor

Display Type:
1 x 0.67" DarkChip™ DMD™
1920 x 1200 pixels native resolution.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16x10
Fill Factor

Key Features

Video & Graphics Processing

  • HDMI 1.4a for Side by Side, Frame Packing, Frame Sequential & Top Bottom 3D formats.

  • Synchronisation of active 3D glasses.

  • DICOM simulation mode.

  • Mobile High-Definition Link (MHL™) connection allows mirrored content from smartphones, tablets and other portable consumer electronics devices.


Geometry Correction

  • Vertical & Horizontal Keystone correction (2D: Vertical ±15°, Horizontal±15°).

  • Four Corner adjustment.

  • Selectable 16:9, 4:3, Native, Letterbox and Full Screen aspect ratios.

  • Digital Zoom +10~-10.


HDBaseT® Interface

  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.

  • Allows the projector to be placed up to 100m from the source with low cost cabling.

  • HDBaseT® includes audio, Ethernet 100BaseT and RS232/IR control.



Colour Processing

  • 2 x speed, 3 Segment (GBY) Phosphor wheel.

  • 2 x 120Hz speed, 4 Segment (RGBY) Colour wheel.

  • 10-bit colour display.

  • Powerful seven point colour correction for accurate colour matching.

Source Compatibility:
Graphics standards up to 1920 x 1200 resolution at 60Hz.
Input support for 4K-UHD, 3840 x 2160 and 4096 x 2160 at 60 Hz.

Inputs/Outputs

 Video & Computer

Type

Connector

Qty

HDMI 1.4a
HDMI 1.4a + MHL
VGA / Analog RGB
VGA / Monitor Out
Composite Video
HDBaseT
USB Type A / (5V/1.5A)
NOTE: The USB is to power WHDI™ interfaces.

Audio:
Audio IN L+R
Audio IN L+R
Mic IN
Audio OUT (variable)
Speakers
HDMI
HDMI
15-pin D-Sub
15-pin D-Sub
RCA
RJ45
USB Type A




Phono
3.5 mm jack
3.5 mm jack
3.5 mm jack
5W speaker
2
1
1
1
1
1
1




2
1
1
1
2
 Communication & Control

Type

Connector

Qty

LAN
RS-232C
USB (for Service)
3D Sync Out

NOTE: The HDBaseT and LAN ports are not shared.
RJ45
9-pin D-sub
Mini B
VESA 3-PIN mini DIN
1
1
1
1
3D Formats Supported
HDTV Formats Supported
Frame Packing
Frame Sequential
Side By Side (half)
Top and Bottom
1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz),1080i (50Hz, 60Hz), 720p (50, 60Hz)
Computer Compatibility Bandwidth
VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA@60hz
Remote Control Automation Control
IR remote control, 2 x IR receivers (front sensitivity up to 7m, rear sensitivity up to 10m) LAN control - Crestron RoomView® Connected
LAN control - Crestron eControl
LAN control - Extron
LAN control - AMX SSDP
LAN control to RS232 by Telnet
HDBaseT communication
Projector status email alerts
Colour Temperature Operation
Warm / Normal / Cold
illumination Type
Typical illumination Life
Laser Light Source 20,000 hours
Lenses

Lens

Part No.

Optimised Focus Range*

Lens Shift

0.5 :1 N/A 0.76m - 1.35m Vert: Fixed Offset 0.6 (U) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount

Manual focus

Mechanical Mounting Orientation
Front/Rear
Front/Rear Ceiling
Two adjustable front feet, 10° (43mm)
Ceiling Mount compatible chassis with 7 off M4 mounting holes
Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements Power Consumption
100-240VAC 50/60Hz single phase Normal Mode (100%) 480W @230V 500W @110V
Eco Mode (80%) 355W @230V 365W @110V
W
Thermal Dissipation
Fan Noise
Normal Mode (typical):
1706 BTU/Hour @ 110VAC
1638 BTU/Hour @ 230VAC BTU/Hour
Normal Mode Typ: 36 dBA / Max: 38 dBA
Operating/Storage Temperature
Operating Humidity
Operating: 0° to 40°C (32F to 104F)
Storage: -20° to 60°C (-4F to 140F)
10 to 85% non-condensing
Weight (Chassis Only)
Dimensions
10.5 kg
23.21 lb
L: 43.71 cm W: 36.0 cm H: 17.71 cm
L: 17.2 in W: 14.17 in H: 6.97 in
Safety & EMC Regulations
 
UL/cUL, CB, CCC/CECP, FCC Class B, FDA, CE
IEC 60825-1:2007 3R
IEC60825-1:2014 Class 1
IEC EN 62471-5 Risk Group 2
 
Accessories
Accessory Part No.
Infrared Remote (replacement)
117-880

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads  

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings


Specifications subject to change without notice. ©2020 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc


map

DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX
T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk

DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 } F: 770.420.1360 | www.digitalprojection.com

DIGITAL PROJECTION, CHINA Rm A2301,Shaoyaoju 101 North Lane,Shi Ao International Center,Chaoyang District,Beijing 100029,PR China
T: +86.10.58239771 | F: +86 10 58239770