Click to Print This Page

logo
logo

 

E-Vision 6110 WU (Preliminary)

6,100 ISO / 5,500 ANSI Lumens | Contrast Ratio: 2,200:1 Native, 20,000:1 Dynamic, 500,000:1 (Advanced Black) | Part Number: 123-844


Key Specifications:

Colour System: Laser Phosphor
Display Type: 1 x 0.67" DarkChip™ DMD™
DMD Specification: 1920 x 1200 pixels native resolution.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio: 16x10
Fill Factor
Key Features:
Video & Graphics Processing
  • HDMI 1.4a mandatory compliance for Side by Side, Frame Packing, Frame Sequential and TopBottom 3D Formats.
  • Synchronisation of active glasses or polarising switcher.
  • DICOM simulation mode
Geometry Correction
  • Vertical & Horizontal Keystone correction
  • Four Corner adjustment
  • Selectable aspect ratios: Fill, 4:3, 16:9, Letter Box, Native, 2.35:1
  • Digital Zoom +10 / -10
HDBaseT Interface
  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
  • Allows the projector to be placed up to 100m from the source with low cost cabling.
  • HDBaseT® Includes Audio, Ethernet 100BaseT and RS232/IR control.
Colour Processing
  • Phosphor wheel: 3 Segment GBY 2 x 7200rpm
  • Colour wheel: 4 Segment RGBW 2 x 7200rpm
  • 10-bit colour processing (30-bits per pixel)
  • Powerful seven point colour correction for accurate colour matching.
Source Compatibility
  • Graphics standards up to 1920 x 1200 resolution at 60Hz
Inputs/Outputs
Video & Computer
Type Connector Qty
HDMI 1.4a
HDBaseT-(LAN/HDBaseT)
VGA / Analog RGB
VGA Monitor out
Composite Video

Microphone In
Audio L/R In
Audio L/R In
Audio L/R Out
HDMI
8P8C "RJ45"
D-Sub
D-Sub
RCA

3.5mm Jack
3.5mm Jack
1xRCA pair
3.5mm Jack
3


1
1
1
1

1
1
1
1
.
Communication & Control
Type Connector Qty
3D Sync Out
LAN
HDBaseT with Ethernet \ RS232 \IR control
Serial RS-232C (In/Out)
Service USB
USB Power out 5V/1.5A
3-pin DIN
8P8C "RJ45"
8P8C "RJ45"
9-pin D-Sub
USB Type B
USB Type A
1
1
1
1
1
1
3D Formats Supported Frame Packing
Frame Sequential
Side By Side (half)
Top and Bottom
HDTV Formats Supported SDTV (480i, 576i), EDTV (480p, 576p), HDTV (720p, 1080i, 1080p), NTSC (M, 3.58/4.43 MHz), PAL (B,D,G,H,I,M,N), SECAM (B,D,G,K,K1,L)
Computer Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA@60hz, Mac
Bandwidth
Remote Control IR remote control
Automation Control LAN
RS-232
Alert Mail for Projector
LAN Control-Crestron® Roomview™-Connected
LAN Control-Crestron® eControl
LAN control - Extron®
LAN Control-PJ Link compatible
LAN Control-AMX® SSDP
LAN to RS232 (RS232 by Telnet)
Concurrence Control for RS232/LAN
PJ Link (Class 1)
Colour Temperature Warm / Normal / Cold
Operation
illumination Type Laser Light Source
Typical illumination Life 20,000 hours
Lenses
Lens Part No. Optimised Focus Range* Lens Shift (Frame)
0.5:1 (fixed) N/A 0.76m - 1.35m (optical range) 0.60m - 3.5m (Mechanical range) Vert: Fixed Offset 0.6 (U) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount Manual focus
Mechanical Mounting Front/Rear
Front/Rear Ceiling
Two adjustable front feet, 10° (43mm)
Ceiling Mount compatible chassis with 7 off M4 mounting holes
Kensington® Security Slot
Orientation Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements 100-240VAC 50/60Hz single phase
Power Consumption 515W @ 230VAC (100% Normal mode) Maximum 530W @ 100VAC (100% Normal mode) Maximum
Thermal Dissipation 1757 BTU/Hour @ 230VAC (100% Normal mode) 1808 BTU/Hour @ 100VAC (100% Normal mode)
Fan Noise Normal Mode Typ: 39 dBA
Operating/Storage Temperature: Operating: 0° to 40°C (32F to 104F)
Storage: -20° to 60°C (-4F to 140F)
Operating Humidity 10 to 85% non-condensing
Weight 12 kg / 26.45 lbs
Dimensions L: 43.71 cm W: 36.0 cm H: 17.83 cm
L: 17.2 in W: 14.17 in H: 7.02 in
Safety & EMC Regulations UL / cUL (USA/Canada), CB, CCC (China), FCC Class B (USA), FDA, CE (European Economic Area), RCM (Australia), Others TBD
Accessories
Accessory Part No.

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

User Guide