INSIGHT 4K LASER

12,000 Lumens | Contrast Ratio: 2,000:1 | Part Number: 114-821

Key Specifications:

Colour System:

3-chip DLP®

Display Type:

3 x 1.38" DarkChip™ DMD™

DMD Specification:

4096 x 2160 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.

Aspect Ratio:

1.90:1

Fill Factor

87%

Key Features:

Video & Graphics Processing

Up to 60fps 4096 x 2160 pixels sequential input via single cable (Display Port 1.2)
3D Capable
Scaling of HDMI 1.4 formats to fill the 4K display
Input 4 (HDMI) can be assigned to overlay a scaled or native image over the main video image.
Dark Time insertion capability
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
Synchronisation of active glasses or polarising switcher.

Image Blanking

Linear black "curtains" adjustable for all four edges.

Color adjustments

Up to 12 bits per color processing (depending on source and input type).
Degamma table maps 12 bit input to 16 bit palette (R, G & B) for display.
Individual R, G & B lift and gain.
Black and White level adjustment via Brightness & Contrast control.
Degamma selection from a list of parametric curves.

ColorMax™

Accurate matching of projectors in tiled or blended applications.
User selection and storage of primary and secondary user defined color targets up to 7 points.

3D Functionality

Full 4K 3D display capability
Frame multiplication capability (2x, 3x) with interleaving of Left/Right repeated frames.
Synchronisation of active glasses or polarising switcher.
Adjustable Dark Time and Synch Offset for optimisation of ghosting and smooth greyscale for switching glasses and polarizers.

Projector Control

Keypad with LCD panel.
Network control via RJ45 and protocol.
PC Control Application

Source Compatibility

Graphics standards up to 4096 x 2160 at 60 fps via DisplayPort. 30 fps via HDMI. Higher input frame rates supported at lower input resolution.

Inputs/Outputs

Video & Computer
Type	Connector	Qty
DisplayPort 1.2 HDMI 1.4 Option Board 3G-SDI DVI-D	DisplayPort HDMI BNC DVI-D	2 2 4 2

Communication & Control
Type	Connector	Qty
3D Sync Out 3D Sync In LAN RS232 Wired Remote In Service Port	BNC BNC RJ45 9-pin D Sub 3.5mm Stereo Jack USB Type A	1 1 1 1 1 1

3D Formats Supported

Dual Pipe (Q3 2016)
Frame Sequential

HDTV Formats Supported

4096 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
3840 x 2160p (24, 25, 30, 50, 59.94, 60 Hz)
1080p (24, 25, 30, 50, 59.94, 60 Hz)
1080i (50, 59.94, 60 Hz)

Computer Compatibility

Up to 4096 x 2160

Bandwidth

N/A

Remote Control

Wired remote control
On-Board keypad with LCD screen

Automation Control

RS232
LAN

Colour Temperature

User selectable from 3300 to 10000K

Operation

illumination Type

Laser Light Source

Typical illumination Life

20,000 hours

Lenses

Lens	Part No.	Optimised Focus Range*	Lens Shift (Frame)
At Native 4K	-	-	-
0.93:1 fixed	117-310	0.5m - 100m	Vert: 0.21 (U) 0.21 (D) frame, Hor: 0.08 (L) 0.08 (R)
1.13 - 1.72:1	115-627	2.5m - 100m	Vert: 0.34 (U) 0.19 (D) frame, Hor: 0.08 (L) 0.10 (R) frame
1.65 - 2.60:1	115-630	3.5m - 100m	Vert: 0.40 (U) 0.20 (D) frame, Hor: 0.13 (L) 0.13 (R) frame
2.53 - 4.98:1	115-632	4.5m - 100m	Vert: 0.37 (U) 0.20 (D) frame, Hor: 0.13 (L) 0.13 (R) frame
At UHD	-	-	-
0.99:1 fixed	117-310	0.5m - 100m	Vert: 0.27 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.11 (R)
1.21 - 1.83:1	115-627	2.5m - 100m	Vert: 0.40 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.14 (R) frame
1.76 - 2.77:1	115-630	3.5m - 100m	Vert: 0.45 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.17 (R) frame
2.70 - 5.31:1	115-632	4.5m - 100m	Vert: 0.42 (U) 0.20 (D) frame, Hor: 0.10 (L) 0.17 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount

Motorised shift, zoom and focus. Intelligent Lens Memory with user-definable preset positions.

Mechanical Mounting

Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.

Orientation

Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes

Power Requirements

200 - 240VAC 50/60Hz single phase

Power Consumption

1600

Thermal Dissipation

5027

Fan Noise

58 dBA

Operating/Storage Temperature:

Operating: 0 to 40C (32 to 104F)
Storage: -10 to 50C (14 to 122F)

Operating Humidity

20 to 80% non-condensing

Weight

67 kg / 148 lbs

Dimensions

H: 32.5 cm W: 70.0 cm L: 93.5 cm
H: 12.8 in W: 27.56 in L: 36.8 in

Safety & EMC Regulations

CE, FCC Class A, UL, CCC

Accessories

Accessory	Part No.
RapidRig™ Frame Ceiling Mount Quad 3G-SDI, Twin DVI Card Replacement Filter Set Lens Adapter Kit for 0.72:1 4K Schneider Lens	116-064 116-065 116-067 115-761 117-343

*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Rigging Frame CAD Drawings Rigging Frame CAD Drawings

User Guide

Laser Risk Group Document

Important Information