Varied DLP Laser Projector Series from Digital Projection Unveiled at InfoComm 2016

NEWS RELEASE – FOR IMMEDIATE RELEASE

Prepared by: Digital Projection, digitalprojection.com

 

Contact: Michael Bridwell | Digital Projection

VP, Marketing and Home Entertainment

mbridwell@digitalprojection.com

+1-770-420-1350 (o)

 

Varied DLP Laser Projector Series from Digital Projection Unveiled at InfoComm 2016

Budget-focused E-Vision Series delivers long-life, bright projection solutions

 

ATLANTA, GA – June 3, 2016 – Digital Projection International (DPI), an Emmy® Award-winning manufacturer of high-performance projection systems, will unveil two new high-lumen, budget-oriented E-Vision laser projectors at InfoComm 2016. Building on the rampant success of the E-Vision Laser 8500, DPI will demonstrate both an E-Vision Laser 6500 and 7500 in Las Vegas. These displays bring a variety of price points, capabilities and installation flexibility to the already recognized E-Vision series. In addition to the new E-Vision Laser projectors, the Digital Projection booth (#C8936) will showcase additional laser-illuminated innovations ranging from the budget-friendly to the ultra-premium.

Developed to save end-users valuable time and budget by removing lamp maintenance from the display, DPI’s E-Vision Laser projectors deliver impactful imaging solutions that installers and system integrators can deploy with minimal maintenance throughout the lifetime of the display. All while expecting over 20,000 hours of illumination performance from the laser-phosphor source. With no lamp replacement cycles to maintain, E-Vision Laser displays have a lower cost of ownership over the lifespan of the display than many lamp-illuminated projector solutions. Additionally, all E-Vision Laser projectors deliver nearly unlimited tilt capabilities giving DPI’s customers an unprecedented amount of installation flexibility. Applications can feature imagery positioned vertically, horizontally, and almost everything in between, without degrading the light source lifespan.

The E-Vision Laser 6500 delivers 6,500 lumens, advanced image contrast of 5,000:1 and advanced capabilities such as DICOM simulation mode. A key differentiator for the E-Vision Laser 6500 rests in its quiet operation, making it an optimal solution for boardrooms and other applications where the projector and audience are closely co-located. Inputs include DVI, HDMI and an HDBaseT® interface with built-in support for transmission of uncompressed high definition video over standard CAT5e/6 LAN cable. This also allows the projector to be placed up to 100m from the source with a low-cable cost. For ease of use, the E-Vision Laser 6500 also contains built-in compatibility with Crestron RoomView® Connected, PJLink – AMX SSDP and LAN.

Built on the same electronics and functionality as the E-Vision Laser 8500, the E-Vision Laser 7500 delivers a wealth of features: incredible brightness at 7,500 lumens, geometry correction and edge blending, Lens Memory presets, and advanced capabilities such as DICOM simulation mode. With features galore and brightness to spare, the E-Vision Laser 7500 thrives in most any commercial application needing a bright, consistent and reliable imaging solution. For applications needing an ultra short throw solution, the E-Vision Laser 7500 can be paired with DPI’s newly launched 0.38:1 Ultra Short Throw (UST) lens. This projector/lens combo is capable of creating an image width between 6.9’ to approximately 24’ and offers ultimate flexibility of projector positioning. Inputs include Displayport, DVI, HDMI and an HDBaseT® interface with built-in support for transmission of uncompressed high definition video over standard CAT5e/6 LAN cable. For ease of use, the E-Vision Laser 7500 also contains built-in compatibility with Crestron RoomView® Connected, PJLink – AMX SSDP and LAN.

The E-Vision Laser 6500 is already shipping in North America, and the E-Vision Laser 7500 ships Q3, 2016. DPI will unveil these projectors in booth #C8936 at InfoComm 2016 in Las Vegas, Nevada, from June 8 - 10, 2016.

E-Vision-6500-Laser2

 

To download a high-resolution version of this image, please visit:

http://www.digitalprojection.com/dp-projectors/e-vision-laser-6500/

About Digital Projection International

Founded in 1989, Digital Projection International (Digital Projection) has been instrumental in the development and application of Digital Light Processing™ technology by Texas Instruments for projection systems. Digital Projection International introduced the world’s first 3-chip DLP® projector in 1997, and has since delivered expert system engineering and world-class customer services, thus maintaining its position as a digital imaging pioneer.

Digital Projection International’s groundbreaking projection research and development has garnered the admiration of industry professionals around the world. This has earned the company many awards, including two Emmy® Awards for Outstanding Achievement in Engineering Development by the Academy of Television Arts and Sciences. Digital Projection remains the first and only projector manufacturer to win the coveted award.

Today, Digital Projection International manufactures and distributes an extensive line of ultra high-performance 3-chip and single-chip DLP® projection systems. These projectors are the reference standard for demanding applications such as large-venue, live-event staging, fortune 5000, education, medical and scientific research, command and control, digital cinema, commercial entertainment, worship and elite home cinema.

For further information and photography, please visit www.digitalprojection.com.

# # #